How To Bios Flash Properly
Posted 17 October 2003 - 10:11 PM
i have read just about every forum topic on it and am still at a deadend ...
i get the red green flash on the eject light ......
when i turn chip off usin 4th dip, switch console on and it boots into dashboard no problem so im sure its not a hardware problem ....
i also did power switch solder for activating and deactivating STM...it appears to work OK
i am conviced it is a bios prob i have ......
i have downloaded the xbitflash tool .........but im not sure if i am usin it properly ......
"Click on the "Write"-button and select a binary file" this is in instuctions .where do i find this binary file ....??
i seem to format OK .it appears to be where i have to select this binery file to write to bios i am havin probs
i believe this is MY prob so any help with this would be great .........
Thanks in advance
Posted 17 October 2003 - 10:15 PM
Posted 17 October 2003 - 10:16 PM
Posted 17 October 2003 - 10:25 PM
but there are quite a few there
does it matter which one i get ....???
sorry again .lol
Posted 17 October 2003 - 11:04 PM
and now get the xbit chip to load in no probs .....
WHY is this not explained in installation instructions ...this chip is meant to idiot proof
i spent the best part of 6 hours tryin to figure this out .and all i needed was to be pointed towards a simple bin file DMS needs to updated there installation instructions so people can get this installed properly
and THANKS again pieces
for all ur help
Posted 18 October 2003 - 01:16 AM
the bios file is ILLEGAL.
they'd be fricking stupid if they posted links or downloads to the bios files.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users