Jump to content


Photo

Ultraxle And Ocarina Of Time


  • Please log in to reply
4 replies to this topic

#1 PdogNZ

PdogNZ

    X-S Enthusiast

  • Members
  • 5 posts

Posted 15 November 2003 - 02:00 AM

When I try to run Ocarina of Time with UltraXLE, I just get a black screen.
I have them on a CDRW, I put it in, UltraXLE loads up but when I go to run Ocarina of Time it just sits there with a black screen.
I'm using EvoX 3921 and UltraXLE v1.0b according to the name of the RAR, although the .nfo says 1.0a?

hmm, I just thought, does the ROM need to be a specific one? I'm using the European version of OOT, does it have to be the NTSC one to work with UltraXLE?

#2 Iriez

Iriez

    XBINS TOTALITARIAN

  • Head Moderator
  • PipPipPipPipPipPip
  • 2,723 posts
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 15 November 2003 - 02:42 AM

I've used the [E] [!] on a ntsc box just fine.

Is it a verified rom? Try verifying it...if not, try the ntsc.

I would suggest first that you disable IGR in evox and try again.

If that doesnt work try using avalaunch or enigmah video disc and switching to ntsc and trying then.

#3 GaijinPunch

GaijinPunch

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,148 posts
  • Location:Tokyo, Japan

Posted 15 November 2003 - 02:55 AM

I've had bad luck in generally when doing anything off of CDRW. True, I'd assume it would just not be able to read/load the ROM in the first place, but you never know. Can you try loading it off the HD?

#4 MichaelNet

MichaelNet

    X-S Senior Member

  • Members
  • PipPip
  • 198 posts

Posted 15 November 2003 - 04:04 PM

Rename : Legend of Zelda, The - Ocarina of Time (U)(1.0)[!].v64 in The Legend of Zelda (U).v64

& use :

- US version 1.0 : The Legend of Zelda (U).v64 ; CRC : ec95702d
- euro version 1.0 : The Legend of Zelda (E).v64 ; CRC : 9852a62f (don't forget to remove // in ultra.ini to activate it).

#5 PdogNZ

PdogNZ

    X-S Enthusiast

  • Members
  • 5 posts

Posted 16 November 2003 - 09:02 PM

Still didn't work sad.gif
My ROM has the same CRC, I put the slashes in front of the US lines in ultra.ini and removed them from the PAL lines* but I think I may have got the name wrong by one character.

I also tried copying it to my HDD from the CD and that didn't work either. I can't try sending it over from my PC because I don't have a crossover cable at the moment.

*I removed the slashes before the line:
QUOTE

patch= -1, 80111b70, word 0 //  PAL Version

and the ones below the note, then I added the slashes to all of the lines in the US section, was that correct?

Edited by PdogNZ, 16 November 2003 - 09:03 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users