Jump to content


Photo

Big Problems


  • Please log in to reply
2 replies to this topic

#1 LiquidZenCloud

LiquidZenCloud

    X-S Member

  • Members
  • Pip
  • 67 posts
  • Xbox Version:v1.1

Posted 01 December 2003 - 09:40 PM

grr.gif I have a X2.2 Light. In the Beginning it was working, When my friends dad first soldered it in. He used solder with 40% tin and 60% lead. Is That Ok. My Xbox is FRAGING. I have Tried Resoldering the DO-point myself. It wouldnt stop FRAGing every Time i would re solder it. The LPC Points Look ok but i am not sure because the LEDs light up on the switch bord and the Chip its self... WHAT SHOULD I DO?!? grr.gif

#2 lordvader129

lordvader129

    He Who Posts Alot...

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 17,752 posts
  • Gender:Male
  • Location:Chicago, USA
  • Xbox Version:v1.1
  • 360 version:v5.0 (360S - trinity)

Posted 01 December 2003 - 09:48 PM

how does it boot when you disable the chip? still fragging?

if your 100% certain the D0 is fine look for damage on the motherboard, solder splashes, lifted/burned traces, things being grounded that shouldnt be grounded

if it boots fine with the chip disabled check your LPC points and try putting a new bios on with an external programmer

#3 LiquidZenCloud

LiquidZenCloud

    X-S Member

  • Members
  • Pip
  • 67 posts
  • Xbox Version:v1.1

Posted 01 December 2003 - 11:28 PM

It is Still fragging when the chip is disabled




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users