Jump to content


Photo

Winbond Flashing Help


  • Please log in to reply
5 replies to this topic

#1 manekineko

manekineko

    X-S Member

  • Members
  • Pip
  • 111 posts

Posted 11 December 2003 - 10:42 PM

I have an Xbox with a W49F020T chip. The connections I made (I opted for the one on the top and one on the bottom method) are rock solid. A multimeter test confirms this. At first EvoX was giving me 09 00 error, so I got the flash definitions from Raincoat .5 and put them in. After that, it recognized it but failed to flash. I searched the forums and found out that for this kind of chip I need to use Raincoat as EvoX will not work.

A tutorial here:
http://forums.xbox-s...T&f=43&t=119253
implies that I must use 007_tsop_flash_kit_1_0_alpha6.zip, and that the other packages will not work. I have no idea where to get this from, it's not on the homebrew software FTP server. They have something called 007savewithraincoat.zip. Will this work instead?

I also note that a lot of people seem to be fragging when trying to flash this chip, even experienced solderers and other people who shouldn't be making mistakes. I know that I can only use EvoX 4979 or M7. Are there any additional issues here I need to be watching out for?

Edited by manekineko, 11 December 2003 - 11:00 PM.


#2 lordvader129

lordvader129

    He Who Posts Alot...

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 17,751 posts
  • Gender:Male
  • Location:Chicago, USA
  • Xbox Version:v1.1
  • 360 version:v5.0 (360S - trinity)

Posted 12 December 2003 - 12:54 AM

007savewithraincoat will work, but make sure you update it to the latest version of raincoat, .501

right-click, save target as

replace the files "raincoat" and "raincoat.conf" (i think they are in 000000000//raincoat)

Edited by lordvader129, 12 December 2003 - 12:54 AM.


#3 wd-40

wd-40

    X-S Senior Member

  • Members
  • PipPip
  • 177 posts
  • Xbox Version:v1.3

Posted 12 December 2003 - 02:12 AM

If you are still having problems, just click here and that will be that...


#4 Zedek

Zedek

    X-S X-perience

  • Members
  • PipPip
  • 374 posts

Posted 12 December 2003 - 11:27 AM

QUOTE (manekineko @ Dec 12 2003, 12:42 AM)
I have an Xbox with a W49F020T chip. The connections I made (I opted for the one on the top and one on the bottom method) are rock solid. A multimeter test confirms this.

Only question I have with this is...is your box a 1.0 or 1.1?

If it's a 1.2+, you might have soldered the same point even though you soldered top and bottom. Two sets of points on 1.2's through 1.5's are electrically identical....so there is a possibility if it's one of these versions you soldered the same point twice!

Now, I would definately get raincoat .501 and try that, but if that doesn't work and you do have a 1.2 or higher, do the second top point and then try it.

If you do have a 1.0 or 1.1....good luck with raincoat .501 wink.gif

Edited by Zedek, 12 December 2003 - 11:28 AM.


#5 manekineko

manekineko

    X-S Member

  • Members
  • Pip
  • 111 posts

Posted 12 December 2003 - 09:43 PM

Sweetness, worked like a charm. Thanks for your help everyone!

#6 Firebaall

Firebaall

    X-S Member

  • Members
  • Pip
  • 149 posts

Posted 14 December 2003 - 03:12 AM

QUOTE (wd-40 @ Dec 12 2003, 03:12 AM)
If you are still having problems, just click here and that will be that...

biggrin.gif

Great link my man......

Helped me out of a jam!

beerchug.gif




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users