Jump to content


Photo

What Does "no Route To Host" In Flashfxp Mean?


  • Please log in to reply
1 reply to this topic

#1 Argoyle

Argoyle

    X-S Senior Member

  • Members
  • PipPip
  • 161 posts
  • Xbox Version:v1.0

Posted 18 December 2003 - 07:35 PM

One possible problem is that your Network Bridge is preventing you from gaining access. Of course, this is only if you have one installed (I had one to let my box access the internet through a crossover cable).

So here's a super simple way to get rid of the problem (just disabling it won't fix it):

1) Open Network Connections.

2) Right click on the Network Bridge, and select properties.

3) Uncheck all boxes in the upper section. They should say things like Local Area Connection, Local Area Connection 2, etc.

4) Apply the settings by clicking OK/Apply/whatever it says down at the bottom.

5) Go back to the Network Connections window, and make sure it is disabled. If not, disable it.

6) Try again to connect to your box with FlashFXP/your program of choice.


Hope this helps.
Argoyle


#2 mrRobinson

mrRobinson

    X-S Caffeinated Member

  • Head Moderators
  • PipPipPipPipPipPipPipPipPip
  • 5,222 posts
  • Gender:Male
  • Interests:Quantum Loop Theory
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 19 December 2003 - 12:58 PM

Other possible reasons to get "no route to host", if you have a firewall not configured properly, or using the wrong ethernet cable (basically no connection), or if you have 2 nics on your pc without clearly defined routes that tell your computer exactly what nic to send packets out for a particular subnet or ip.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users