Jump to content


Photo

Wont Flash New 4981.06 To Chameleon


  • Please log in to reply
6 replies to this topic

#1 Seedz

Seedz

    X-S Member

  • Members
  • Pip
  • 99 posts

Posted 24 January 2004 - 12:17 AM

Im trying to flash the new X2 4981.06 256k BIOS to my Chameleon on bank 0 (which it is currently in). I created a custom color X logo using the latest XBTool. Got the MD5 and pasted it in my evox.ini. I then FTP'd my newly created BIOS to the BIOS folder in C. The new BIOS shows up in my BIOS selection. I select it to flash to bank 0 on my chameleon, and it gives me and "unknown flash type" I rebooted and I still have the same XBOX logo. So apparently it didnt flash. What am I doing wrong? Can someone help me out please. Thank you to all who lend a helpful hand.

#2 ytsejam

ytsejam

    X-S Member

  • Members
  • Pip
  • 121 posts

Posted 24 January 2004 - 12:54 AM

You need the correct flash code in your Evox.ini Some examples are:

#
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x015b,"AMD - Am29LV800B",0x100000
Flash = 0x01a4,"AMD - Am29F040B",0x80000
Flash = 0x01da,"AMD - Am29LV800B",0x100000

Yours might not be one of the ones I listed, but it should work. You can get more from other posts in the Chameleon or Evox forums.

Edited by ytsejam, 24 January 2004 - 01:09 AM.


#3 katz

katz

    X-S Senior Member

  • Members
  • PipPip
  • 209 posts
  • Location:Melbourne, Australia
  • Xbox Version:v1.4

Posted 24 January 2004 - 01:00 AM

i also cannot flash the X2 4981.06 256k on my chameleon. Unknown Flash type....how do i fix it?

#4 ytsejam

ytsejam

    X-S Member

  • Members
  • Pip
  • 121 posts

Posted 24 January 2004 - 01:03 AM

QUOTE (katz @ Jan 23 2004, 10:00 PM)
i also cannot flash the X2 4981.06 256k on my chameleon. Unknown Flash type....how do i fix it?

Read my post above.

#5 sulfur

sulfur

    Super Xbox Saiyan

  • Moderator
  • PipPipPipPipPipPip
  • 2,018 posts
  • Location:Atlanta
  • Xbox Version:v1.0
  • 360 version:v5.0 (360S - trinity)

Posted 24 January 2004 - 01:13 AM

^ good job wink.gif

#6 Seedz

Seedz

    X-S Member

  • Members
  • Pip
  • 99 posts

Posted 24 January 2004 - 03:58 AM

Do I have to remove flash protection? All my jumpers on my chip are off, Im in mode one, flashing to bank 0. Thanks.

#7 ytsejam

ytsejam

    X-S Member

  • Members
  • Pip
  • 121 posts

Posted 24 January 2004 - 12:46 PM

I you just want to flash to bank 0 again you don't have to touch anything (DIP switches)on the chip. Just flash from Evox.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users