Jump to content


Photo

Need Help With Fragging


  • Please log in to reply
6 replies to this topic

#1 Matrix733

Matrix733

    X-S Member

  • Members
  • Pip
  • 78 posts

Posted 24 January 2004 - 06:24 PM

hello all, i really screwed this box up i think. i have a version 1.1 box and installed a aladdin advance 64 chip (non socketed) in.

after the install, i power up and it shutdown and restart 3 times and start flashing red and green.

i removed the d0 point, still nothing, won't even boot the ms dash. i removed the mod totally look for solder splash and no go same symthoms.

I think i screwed up that d0 point or something is messed up in my tsop, and i also get no audio or video.

i will go over and check the do point again as i think my problem was i came across a tutorial to soldier to the d0 point on top of the board and thats probable where i have problems then i switched to the underside and still no go.

the box seems to be checking for a bios to boot so i probable have d0 screwed up or i @#% my bios/tsop up.

any ideas and or suggestion. thanks. i had ordered two of the same chips just in case, but since it won't even boot the ms dash, does this means something else is wrong?

#2 Matrix733

Matrix733

    X-S Member

  • Members
  • Pip
  • 78 posts

Posted 24 January 2004 - 10:56 PM

there must be some pros around here, need your help, thanks.

#3 JakeDaGreat

JakeDaGreat

    X-S Senior Member

  • Members
  • PipPip
  • 271 posts
  • Xbox Version:v1.5

Posted 24 January 2004 - 11:06 PM

QUOTE (Matrix733 @ Jan 24 2004, 03:24 PM)
hello all, i really screwed this box up i think. i have a version 1.1 box and installed a aladdin advance 64 chip (non socketed) in.


Aladdin 64? Isn't that a PS2 chip?
Never heard of an Aladdin Xbox mod....is it new?

#4 Trevante

Trevante

    X-S Messiah

  • Members
  • PipPipPipPipPipPipPip
  • 3,929 posts
  • Xbox Version:v1.1
  • 360 version:unknown

Posted 24 January 2004 - 11:10 PM

QUOTE (JakeDaGreat @ Jan 25 2004, 01:06 AM)
QUOTE (Matrix733 @ Jan 24 2004, 03:24 PM)
hello all, i really screwed this box up i think.  i have a version 1.1 box and installed a aladdin advance 64 chip (non socketed) in.


Aladdin 64? Isn't that a PS2 chip?
Never heard of an Aladdin Xbox mod....is it new?

no, it's an xbox modchip, although i thought it was called the aladdin advance.

#5 bigga

bigga

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,514 posts
  • Location:Yurop
  • Xbox Version:v1.0
  • 360 version:v2 (zephyr)

Posted 24 January 2004 - 11:15 PM

check for any solder spashes or damage around the area you were soldering

#6 Matrix733

Matrix733

    X-S Member

  • Members
  • Pip
  • 78 posts

Posted 25 January 2004 - 03:33 AM

The aladdin advance 64 is an xbox chip found here http://www.aladdin-chip.com/ . Its a simple mod actually, just my first for xbox. thanks.

#7 Matrix733

Matrix733

    X-S Member

  • Members
  • Pip
  • 78 posts

Posted 25 January 2004 - 08:10 AM

Got it up and running, i traced the d0 line under the video chip and soldier a wire fro the point it broke on top to the point on the back. It booted up no problem. I then reinstalled the mod and it still booted up in both mode, thanks. biggrin.gif




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users