Jump to content


Photo

Flashing X2.3blite+ With Multibios


  • Please log in to reply
5 replies to this topic

#1 dkedar77u

dkedar77u

    X-S Senior Member

  • Members
  • PipPip
  • 261 posts

Posted 09 February 2004 - 01:51 PM

if in the tool thing
if the firs slot has, x2 bios
the 2nd has evox eject fix

then will bank 1 use both bios at the same time?
and bank 2 be cromwell?
i'm talking about a x2.3b lite +

#2 thewickedjester

thewickedjester

    X-S Knowledgebase

  • Members
  • PipPipPipPipPipPipPipPip
  • 4,012 posts
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 09 February 2004 - 02:20 PM

well, im not sure i understand the question but, the xecutor lite has only 2 slots for bios', so you can only have 2 bios' on the chip at one time, it will use whatever bios is flashed to bank you have selected via the switch panel on the chip.

#3 dkedar77u

dkedar77u

    X-S Senior Member

  • Members
  • PipPip
  • 261 posts

Posted 09 February 2004 - 06:01 PM

can't i use 2 bios at once?
when u make bion.bin
u put the same bios twice for bank 1
say u don't. if in the 2nd one u put in another one
can u use 2 bios at once?


#4 da_shatterer

da_shatterer

    X-S Senior Member

  • Members
  • PipPip
  • 228 posts

Posted 09 February 2004 - 08:17 PM

im kinda confused at the question also. Basically in the chip there are two memory banks. You flash whatever 512K bios you want into each one. When you load up your Xbox, use the switch on the external board thing and switch it to whatever bios you plan on using. You can only load one bios at a time from the chip. Hope this helps! biggrin.gif

#5 Ben999_

Ben999_

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,919 posts
  • Location:Lebanon, PA, USA
  • Xbox Version:v1.0
  • 360 version:unknown

Posted 09 February 2004 - 08:24 PM

there is no such thing as combining bios's or booting from more than one at a single bootup. Also, the xecutor 2 bios already has a built in eject fix plus a few more features than the evox bios. So i'd say it is pointless to have both of them on your chip.

#6 fezzman

fezzman

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,303 posts

Posted 09 February 2004 - 08:35 PM

I wouldn't recommend flashing your chip with a full 1mb bios either. Stick to one 512k bios (256k x 2) in just the first two banks. This way you will have your new bios on bank one but will still have cromwell on bank two. This is just in case if you have a problem flashing you can still try it again with bank two.

Once you've got bank one up and running then you can use evox or flashx (my favorite) to program your chip more to your favorite specs.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users