Jump to content


Photo

X2.3b Pro Bad Flash Help!


  • Please log in to reply
No replies to this topic

#1 JazzSax

JazzSax

    X-S Enthusiast

  • Members
  • 10 posts

Posted 27 February 2004 - 05:55 AM

Alright flashed 1meg M7 bios on x2.3pro with Flash X and now it won't boot at all..M$ will boot with mod off, but will not boot in any bank...FRAG...FRAG....Power on and FRAG....Read tut but it appears his problem was cold solder joint. My chip was working until last night. Tried to flash with X2BMV, but does not recogonize it(123 off 4 on and power) It even does the 2 FRAG and power in that bank also. Tried the DOS version off of boot disk and no go either...is their any other way to flash this sucker? (Don't have other chip or friends dry.gif ) I am running Win2000...Are their OS specific settings for X2BMV2? Also are their pinout schematics or voltage checks that can be done? My chip came with 2 LPT interconnect boards, and heard somewhere that one was bad...could this be a possibility? I am lost...open to any suggestions....

JAzz blink.gif

P.S I am using a regular straight-thru wired 6' Parallel Cable





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users