Posted 29 February 2004 - 01:31 PM
Posted 29 February 2004 - 01:34 PM
static ip should be off
Posted 29 February 2004 - 01:43 PM
Is there only 1 LAN ip for the router. I also have my PC connected to the router. And I should turn off the static IP on the xbox?
Posted 29 February 2004 - 01:46 PM
Posted 29 February 2004 - 01:47 PM
Posted 29 February 2004 - 02:11 PM
|QUOTE (mario24601 @ Feb 29 2004, 03:47 PM)|
|can you tell me how to do that? I am so new to this and just need help, thanks!|
yes, static ip should be off
Posted 29 February 2004 - 02:26 PM
1.pc and xbox ON? (and router or others),set default gateway to 0.0.0.0
2.correct cable? crossover if you ftp direct from pc to xbox or straight through with router.
3.nic lights is on? (green and/or orange)
4.(using crossovercable) IP on pc set to 192.168.0.(4)*. Xbox IP set to 192.168.0.(3)** . Edit necessary info in ftp soft as
SITE NAME=XBOX, IP ADDRESS=192.168.0.3(this ip is the address you want to connect, in this case your Xbox),USER NAME=XBOX,PASSWORD=XBOX(usually set to XBOX if not been changed),
PORT=21, under options=all unchecked,
*= this is optional,i use 4 in my ip.
**=usually is this set to 3, universial you may say.
static ip set to yes.
setup network set to yes.
5.using router. reboot every single piece of hardware such as pc,router,modem and xbox AFTER you have plugged the right cables in.
now, you router should send out a ip address to your xbox( make sure dhcp is ENABLE and that "use static ip" on your xbox is set to NO(you have to reboot xbox if you change things in .ini file))
PC settings should be reciving IP and DNS address automatically, (if you have messed with nic configurations, try set to default)
If you`ve done it right, click on settings(xbox) and it should look somethings like this: type=DHCP,IP=(usually somewhere around 192.168.1.197)This is the IP address you recive from router.
LINE STATUS=100/FULL DUPLEX or something.
6.back to ftp. The IP on xbox, edit that into ftp address you try connecting and hit CONNECT BUTTONor whatever you do to make ftp prog. run.
7.Turn firewall off and check if anti virus prog. is stopping it by disable antivirus.
8. when ever you have MADE ANY changes in evox.ini or other, REBOOT Xbox.
9. if this doesn`t work? I don`t know, it worked for me.
ps! TO run ping command type PING followed by the IP ADDRESS to want to ping and -T in command prompt.
OR look in my sig, how to ftp for total newbs.
Posted 29 February 2004 - 02:34 PM
what steps do I have to take to upgrade my xbmp from 2.3 to 2.4...is 2.4 better. I want to do this because I hear 2.4 plays AAC files and I have many of them.
Posted 29 February 2004 - 02:36 PM
mke sure you don`t delete files you want to have..
Posted 29 February 2004 - 02:40 PM
Posted 29 February 2004 - 03:05 PM
|QUOTE (mario24601 @ Feb 29 2004, 04:40 PM)|
|In the F drive on the xbox I found a folder labled XBMP, I assume this is what I need to delete and replace it with the new 2.4. but how do I do that, I can figure out how to delete and do I delet the whole folder XBMP and then how to I replace it with 2.4? Sorry so many questions but just dont want to ruin the xbox|
make sure you have a "good" working version of xbmp2.4, that you have a default.xbe and all the other stuff.
as long as you don`t use xbmp for a dash somehow, just erase that old xbmp folder.
ftp the new one to the same place, it shouldn`t be any harder than that
Posted 29 February 2004 - 03:11 PM
|QUOTE (mario24601 @ Feb 29 2004, 05:06 PM)|
|do you have a link to a complete 2.4?|
try the usual places!!
Edited by duudfromnorway, 29 February 2004 - 03:12 PM.
Posted 29 February 2004 - 03:25 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users