Jump to content


Photo

Programming Matrix With Programmer


  • Please log in to reply
5 replies to this topic

#1 xboxhacker2004

xboxhacker2004

    X-S Member

  • Members
  • Pip
  • 81 posts

Posted 15 April 2004 - 09:34 PM

I was having the "Device not found" using WinLPC. I tried a few different computers and finally got to one that would allow me to use winLPC. The thing is that it takes an awefully long time to read, write or verify. Long time is like 5+ minutes just for a 256kb bios? Is this normal?

I also tried wmilk.exe. It's slightly faster. I can burn a new image onto the chip using this program fine if I don't turn on verify. But if I do, it'll go 3/4 of the way and then halts due to a verify error. Something tells me this chip may be deffective? Can this be?


#2 xboxhacker2004

xboxhacker2004

    X-S Member

  • Members
  • Pip
  • 81 posts

Posted 16 April 2004 - 02:43 PM

Never mind. The chip works fine if I just use wmilk.exe instead of winLPC.exe.

#3 blacknasty

blacknasty

    X-S Member

  • Members
  • Pip
  • 115 posts

Posted 01 July 2004 - 07:00 PM

what option /switches are you using to program chip?
I am having the exact same problem.
is it .... wmilk -p bios.bin? i cant figure it out. it wont recognize device on windows xp. i did it once a long time ago on my win2000 laptop, but i no linger have that computer.
any help would beappreciated.

#4 blacknasty

blacknasty

    X-S Member

  • Members
  • Pip
  • 115 posts

Posted 01 July 2004 - 07:02 PM

also.. does the LED turn on if its correctly plugged into the cpu?

#5 imamafackinhokie

imamafackinhokie

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,452 posts
  • Location:Pittsburgh
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 02 July 2004 - 09:57 AM

I think the LED only turns on when flashing from the computer, as well as when it's in the xbox.

#6 old engineer

old engineer

    X-S X-perience

  • Moderator
  • PipPip
  • 405 posts
  • Location:U.K
  • Interests:Xbox Development
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 02 July 2004 - 04:54 PM

This is the command u need to program a Matrix:

wmilk -c -a ffc00000 -v -p myfile.bin

...Replace myfile.bin with a 256k bin file of your choice.

LED turns on when its correctly plugged into the P.C (don't use an extension lead)

Hope this helps.


Just reprogrammed on of these the other day.


P.S: Tried 3 tower P.C's, with XP pro, no joy though

...Ended up using a laptop with XP home.

And 'yes' they do take a long time to write to the chip, but u have to cross your fingers that it manages to do it in the first place smile.gif

Edited by old engineer, 02 July 2004 - 04:55 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users