Jump to content


Photo

No Modchip, Xbox Won't Boot


  • Please log in to reply
2 replies to this topic

#1 subdigital

subdigital

    X-S Member

  • Members
  • Pip
  • 121 posts
  • Location:Houston
  • Interests:xbox modding (duh), computers, guitar
  • Xbox Version:v1.0

Posted 30 April 2004 - 05:52 PM

Having problems with installing a x2.3b lite on a v1.0 xbox, I removed the chip and discovered that the xbox will not boot.

I have not damaged any traces near d0 or the lpc points, I have checked them with a multimeter. I also do not see any solder splash anywhere on the board.

When I turn on the xbox, the light stays solid green, but I get no audio, no video. I can hear the xbox dvd-rom and HD working fine. The AV cable IS plugged in (before someone suggests that).

If I push the eject button, the light blinks green and I can hear the dvd-rom working, however the tray never ejects, and the light never stops blinking.

I have no idea what is wrong here. Any suggestions?

#2 Argoyle

Argoyle

    X-S Senior Member

  • Members
  • PipPip
  • 161 posts
  • Xbox Version:v1.0

Posted 30 April 2004 - 07:24 PM

That sounds like what happened to my friend's box when it went into flash mode. I think that's what it was, anyway.

#3 subdigital

subdigital

    X-S Member

  • Members
  • Pip
  • 121 posts
  • Location:Houston
  • Interests:xbox modding (duh), computers, guitar
  • Xbox Version:v1.0

Posted 30 April 2004 - 07:27 PM

I removed the modchip though. If it was in flash mode (Cromwell bios), then it would flash green/orange and the tray would eject. Also since my v1.0 xbox has a conexant video encoder, I would be able to see the image on the screen.

Any other ideas?




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users