Jump to content


Bank 1 Bank 2 Question When Flashing

  • Please log in to reply
4 replies to this topic

#1 BatmanMN_M


    X-S Young Member

  • Members
  • Pip
  • 51 posts

Posted 09 May 2004 - 04:41 PM

i just installed my modchip and followed these instructions http://www.teamxecut...m/flashbios.htm which were very helpfull, only thing is at the end, it says to switch over to bank 2, now to be very carefull, i wanted to verify do need to do the same as i did with bank1? or did they just say to switch banks to make sure everythings working?

#2 CrakkedOut


    X-S Expert

  • Members
  • PipPipPip
  • 731 posts
  • Location:LINY
  • Xbox Version:none
  • 360 version:none

Posted 09 May 2004 - 09:09 PM

well i think that tutorial was written using a 512k bios.....so that wud mean you wud have switch to bank 2 to see if the bios was flashed correctly, which i think make it read a 512k bios......

Edited by CrakkedOut, 09 May 2004 - 09:10 PM.

#3 BatmanMN_M


    X-S Young Member

  • Members
  • Pip
  • 51 posts

Posted 10 May 2004 - 03:53 AM

so should i put in the bios that i put on bank 1 and put that on bank 2 also? or should i just restart back with bank 1 and begin to install evoX?
i can mention evoX right? from what i understand you can talk about it, just not talk about sharing it

#4 OpusDei


    X-S Member

  • Members
  • Pip
  • 85 posts

Posted 10 May 2004 - 11:29 AM

if you followed the tutorial step by step you wouldnt need to ask any questions whatsoever wink.gif

#5 doeman


    X-S Young Member

  • Members
  • Pip
  • 58 posts

Posted 21 May 2004 - 05:48 PM

I did my first mod yesterday using an xecuter 2.3B lite and i have no idea if this is what is going wrong with my install. Here's the scoop:

Intalled everything using the teamxecuter tut and flashed the 512k (4983) bios to bank 1 on a (ver 1.0) xbox.

Booted the xbox and showed thexecuter 2 logo under xbox log and went into the MS dashboard.

My problem is that when i add evox, ava or whatever other dashboard to the C: partion...the system freezes on the xbox logo.

Evoxdash.xbe is located in my F: partion also and it doesn't boot it at all.

My question is, should i have made another 512k flash of the same bios on bank 2? to make it a total 1mb?

Does that make a diff? anyone have any suggestions.

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users