Jump to content


Photo

Cleared Jewel And Its Foggy


  • Please log in to reply
5 replies to this topic

#1 xrunner

xrunner

    X-S Member

  • Members
  • Pip
  • 101 posts
  • Location:gulfport mississippi
  • Xbox Version:v1.0

Posted 21 June 2004 - 03:47 AM

i just finished clearin my jewel half way through it started getting foggy how do i get rid of that?


#2 xrunner

xrunner

    X-S Member

  • Members
  • Pip
  • 101 posts
  • Location:gulfport mississippi
  • Xbox Version:v1.0

Posted 21 June 2004 - 04:13 AM

someone has to know come on

#3 markland556

markland556

    The xbox scene master

  • Members
  • PipPipPipPipPip
  • 1,708 posts
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 21 June 2004 - 04:14 AM

what are you using to clear it?

#4 parksah07

parksah07

    X-S Enthusiast

  • Members
  • 26 posts

Posted 21 June 2004 - 04:32 AM

if you use nail polish remover then it seems to fog it up big time, you can use the sanding techniques to clear it up, i did anyways

there is a tutorial on this somewhere, i used 300 grit sandpaper to rough it up, 600 to smooth it up, and 1200 to smooth it even more, then you put water on the 1200 grit to do a bit more smoothing, then finally white toothpaste to polish, mine isnt 100% perfect but its much better then a foggy one

hope this helps


#5 xrunner

xrunner

    X-S Member

  • Members
  • Pip
  • 101 posts
  • Location:gulfport mississippi
  • Xbox Version:v1.0

Posted 21 June 2004 - 04:51 AM

i used nail polish remover


#6 punqewe

punqewe

    X-S Expert

  • Members
  • PipPipPip
  • 668 posts
  • Location:edmonton,alberta canada
  • Xbox Version:v1.1
  • 360 version:unknown

Posted 21 June 2004 - 04:53 AM

You probably used nail polish remover with acetone.....next time get stuff without. Even the stuff without will burn into the jewel if left on too long,you have to watch it. If you can the sanpaper method mentioned above works pretty good....you can also add the step up to 2000 grit sandpaper,it works good as well. Just loop some duct tape on the top of the jewel and put your fingers through it and do figure eights over the sand paper. (it leaves less noticable scratches) Also car wax with a rubbing compound has been known to work for me too. Just pour some onto a sponge and do the duct tape method on the sponge. Good luck!




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users