Jump to content


Photo

Wiring The Clear S Controller With Leds


  • Please log in to reply
7 replies to this topic

#1 xboxhaxorz

xboxhaxorz

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,193 posts
  • Location:Virginia
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 02 July 2004 - 11:08 PM

after i put lik 15 leds in my controller, i cant get it closed, does anybody have pics of how they wired theres to reduce clutter

#2 Kean

Kean

    X-S X-perience

  • Members
  • PipPip
  • 382 posts
  • Location:Wisconsin
  • Interests:Video Games<br />Music<br />Audio Engineering
  • Xbox Version:v1.4

Posted 02 July 2004 - 11:17 PM

maybe less is more....if you know what I mean wink.gif

#3 dougMod

dougMod

    X-S Messiah

  • Members
  • PipPipPipPipPipPipPip
  • 3,031 posts
  • Location:HH,Ca (USA)
  • Xbox Version:unk
  • 360 version:unknown

Posted 03 July 2004 - 01:18 AM

well u can sodler some of the LEDs 2gether with some short wire, then only have like 2 wires form gounrd and +5 of what ever

#4 spgurley

spgurley

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,687 posts
  • Location:Ohio, USA
  • Xbox Version:v1.1
  • 360 version:v1 (xenon)

Posted 03 July 2004 - 02:18 AM

Use less led's

#5 snake3k1

snake3k1

    X-S Expert

  • Members
  • PipPipPip
  • 573 posts
  • Xbox Version:v1.0

Posted 03 July 2004 - 02:20 AM

i've seen a mad catz controller with 28 leds, so u can try it with more leds

#6 cromat44

cromat44

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,661 posts
  • Xbox Version:v1.6
  • 360 version:v1 (xenon)

Posted 03 July 2004 - 02:29 AM

15 is a little excessive.... wink.gif

#7 iruleathalog

iruleathalog

    X-S Senior Member

  • Members
  • PipPip
  • 215 posts
  • Location:Mississippi
  • Xbox Version:v1.4

Posted 03 July 2004 - 02:52 AM

just hotglue them or tape them down to make them stay

#8 IITangoCrazy

IITangoCrazy

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,106 posts
  • Location:Ontario, Canada
  • Xbox Version:v1.0

Posted 03 July 2004 - 05:58 AM

ok you need to continually trial fit your controller when you are putting the LEDs in

make sure you put them in places where there is clearance for them.

also try to use as little wire as possible in the controller as this will help you to cut back on the clutter as well

but you most likely have a few LEDs in positions where they hinder the re assembly of the controller. just need to make some minor adjustments to the locations of these leds.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users