Purpose: To use the SST chip from your modchip as a standalone mod, which is flashable via evox
It's pretty simple really, we just take the SST chip from the socket of the old modchip, or desolder it, then do some bridging of the pins and wire it all up
Here is the pin layout digram. All you need to do it connect all the points of the same color on the socket or chip, either by bridging them with solder or connecting wires. Then you connect your mod to the LPC bus on the Xbox motherboard, again to the apropriate colors. Credit goes to Milksop for the original diagrams =)
Here is one of my 2 LPC Mod v2.0's that I had, this one worked:
However the 2nd one was a dud, fortunately it was only the PCB so I simply took the SST chip from the socket, followed my diagram above, and here is the finished product:
Edited by rewen, 15 January 2003 - 01:54 AM.