Jewel Scratch Remover
Posted 24 July 2004 - 06:56 AM
Posted 24 July 2004 - 06:58 AM
Posted 24 July 2004 - 07:10 AM
Posted 24 July 2004 - 07:20 AM
Posted 24 July 2004 - 07:32 AM
Posted 24 July 2004 - 08:08 AM
If it's too late, then toothpaste will work, but it just takes a while.
Posted 24 July 2004 - 08:12 AM
Posted 24 July 2004 - 08:17 AM
Posted 24 July 2004 - 09:06 AM
Edited by telexen, 24 July 2004 - 09:06 AM.
Posted 24 July 2004 - 12:27 PM
I've used it on all kinds of stuff: Laptop screens, motorcycle parts, my iPod, and yes, an Xbox jewel.
You can get it cheaper other places than from Xoxide anyway.
Posted 24 July 2004 - 01:23 PM
I do a lot of work in the automotive paint industry so I just applied my techniques to when I sanded the back of jewel, now it haws 0 scratches.
I stripped the paint off with paint stripper then sanded with 800 grit then finally I held it in a bowl of water with 2000 Grit wet. This got it very very clear with only the slighetest scraatches left from the 2000. Now being the pick bastard I am I rubbed it back with Mcguaaries(spelling?) polish glaze I use on cars i've just sprayed to do the same, it's a mild abrasive and also fills the small scratches, after about 4 or 5 coats of rubbing then polishing it's crystal clear. =) We use it on car paint for showcar finishes and it works on jewels too =)
Hope this helped, I'll try toothpaste on another jewel I have. Sounds too easy =)
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users