Jump to content


Photo

How To Know If Bios Was Properly Installed?


  • Please log in to reply
7 replies to this topic

#1 serf21

serf21

    X-S Enthusiast

  • Members
  • 7 posts

Posted 31 July 2004 - 08:59 PM

once i install the bios (xecuter), how can i tell its properly installed when i turn on the xbox? should i different menu appear?

#2 stacker69

stacker69

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,022 posts
  • Xbox Version:none
  • 360 version:v4.0 (jasper)

Posted 31 July 2004 - 09:03 PM

WhEN you turn on the xbox, underneath the xbox logo instead of seeing MS you'll see "XECUTER2".

#3 bigga

bigga

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,514 posts
  • Location:Yurop
  • Xbox Version:v1.0
  • 360 version:v2 (zephyr)

Posted 31 July 2004 - 09:04 PM

When it boots up and you see the Big green X, it should say 'XECUTER2' underneath rather than
M ICROSOFT. You can now boot up with an Evox disc to gain FTP access and go from there, or obtain one of the many installer discs that are knocking about

Edited by bigga, 31 July 2004 - 09:05 PM.


#4 kdawg325

kdawg325

    X-S X-perience

  • Members
  • PipPip
  • 301 posts
  • Location:Minnesota
  • Interests:Sports
  • Xbox Version:none
  • 360 version:v1 (xenon)

Posted 31 July 2004 - 09:05 PM

It is one of the best things you can see biggrin.gif

#5 serf21

serf21

    X-S Enthusiast

  • Members
  • 7 posts

Posted 31 July 2004 - 09:11 PM

i followed everything here
http://www.xbox-scen...icles/xbins.php

and downloaded Xecuter, just to make sure, a bios could be a .rar file right?

i wrote it to the chip, but stills says MS when i start up, so i guess im missing something!

#6 kdawg325

kdawg325

    X-S X-perience

  • Members
  • PipPip
  • 301 posts
  • Location:Minnesota
  • Interests:Sports
  • Xbox Version:none
  • 360 version:v1 (xenon)

Posted 31 July 2004 - 09:13 PM

Use the guide in this guy's signature

http://forums.xbox-s...showuser=123419

#7 stacker69

stacker69

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,022 posts
  • Xbox Version:none
  • 360 version:v4.0 (jasper)

Posted 31 July 2004 - 09:16 PM

What do you mean by "I wrote it to the chip"?? You need a boot disk of some sort to flash your bios or if you have one of them chips that has an external flashers.

#8 serf21

serf21

    X-S Enthusiast

  • Members
  • 7 posts

Posted 31 July 2004 - 09:18 PM

im not supposed to use the x-control program and write it to the X-chip (using the USB cable plugged into the chip!?




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users