Jump to content


Photo

Xbox V1.0 And A Modchip


  • Please log in to reply
4 replies to this topic

#1 Aktionze

Aktionze

    X-S Young Member

  • Members
  • Pip
  • 59 posts

Posted 13 September 2004 - 05:08 AM

I am newbie to this website and I have a question to ask you pros. So I have xbox v1.0 and I've heard from some people that Xenium Ice solderless won't work good on xbox v1.0-v1.2 so should I buy the solderless one or should I wait for Xecuter 3? <- because this is another modchip I desire biggrin.gif

#2 xman954

xman954

    X-S Messiah

  • Dev/Contributor
  • PipPipPipPipPipPipPip
  • 3,028 posts
  • Location:the bottom of Tampa Bay
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 13 September 2004 - 05:32 AM

soft mod it while you decide which chip to get.. tongue.gif

#3 --Bubba--

--Bubba--

    X-S Member

  • Members
  • Pip
  • 66 posts
  • Location:USA , DELAWARE
  • Interests:XBOX
  • Xbox Version:v1.0

Posted 13 September 2004 - 05:48 AM

DISCLAIMER: I am a noob. I am no pro.

Sounds like your right on track as far as what chip to buy.(you will be the 1 that ultimately decides what chip is best for you and what you want to do with your modded xbox.)

My only advice would be to solder it.
if you don't know how. Try to learn.
If you don't want to learn. Find somebody who will.do it for you (Dad, uncle, friend, or trusted neighbor.)
Soldering will save you a ton of headaches. (so i was told.)

If you get a xenium ice and you decide to solder use the quick solder method.( my 2 cents.)
I did the pin header install on the xenium w/ a ver 1.0 xbox, and regret it. It was a whole lot of xtra work.

Edited by --Bubba--, 13 September 2004 - 05:50 AM.


#4 LepPpeR

LepPpeR

    Author of Craxtion

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPip
  • 6,388 posts
  • Gender:Male
  • Location:Westchester, New York
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 13 September 2004 - 06:11 AM

There are no problems with a 1.0 and a solderless chip. Soldering is always better but if you are going to do a solderless a 1.0 will not be a problem.

#5 Nightfire-Player

Nightfire-Player

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,403 posts
  • Location:Jersey Channel Islands - UK
  • Xbox Version:v1.4
  • 360 version:none

Posted 13 September 2004 - 03:55 PM

I've got a solderless chip in my V1.0 box and never had any problems with it.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users