Jump to content


Simple Frag Question

  • Please log in to reply
1 reply to this topic

#1 Transmutated


    X-S Enthusiast

  • Members
  • 13 posts

Posted 29 October 2004 - 03:33 AM

Alright...heres the low down

Installed 2.6 lite into a 1.3 or 1.4...to similar to really care. Focus encoder
*Pin-header install
*D0/HDD LED line/LAN LED line

Install was flawless, no problems...flashed flawlessly. Loaded Evox, then ran it. I went to system settings, changed a couple things and rebooted a couple times with the reboot xbox from Evox menu. Well, I changed an IP address setting...saved, then did the evox reboot. The xbox went to reboot, once the screen went black, the front of the xbox flashed just red. So I turned it off then rebooted. Frag...heres how it was...

Chip enabled=red & green
Chip disabled=orange & red

I tried this tut... http://xbox-scene.co.../red-orange.php

Didnt work. Just wondering what it could be. I completly desoldered every thing useing desoldering braid. The D0 point on the back looks completly intact. So there it is...some expert help would be great.

Currently flashing red & orange

#2 8itgreat


    X-S Expert

  • Members
  • PipPipPip
  • 528 posts
  • Location:Oregon
  • Xbox Version:v1.4
  • 360 version:none

Posted 31 October 2004 - 09:59 AM

you probably had it working fine...just needed to change the correct time in ms dash...might not...but thats my guess...

the xbox mobo doesnt have a battery...so if unplugged you may have to reset the time....sometimes the time causes a lot of problems...sorry for your trouble

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users