Jump to content


Photo

Flashing A 29 Wire Homebrew


  • Please log in to reply
No replies to this topic

#1 pedro

pedro

    X-S Expert

  • Members
  • PipPipPip
  • 633 posts

Posted 15 November 2004 - 03:31 PM

I found the necessary parts I needed for building a 29-wire homebrew to fix my TSOP,
but how do i get a bios onto the homebrew chip?
do I need to build some sort of programmer like you can with a cheapmod?

I have another xbox with an x2.6 lite and the TSOP is still good on it, can I use that box to flash the homebrew by doing this:

1. I disable the LPC mod,

2.wire up the 29-wire mod, with the necessary wires to disable it not connected (using a
switch) so the box boots from the stock bios on the TSOP,

3. run raincoat,

4. switch the enable switches on my homebrew,

5. run the flash utility if raincoat

would this process flash my homebrew chip so I can then connect it to my other xbox with a bad TSOP and repair it?

thanks
pedro




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users