Jump to content


How To Make 1.0 Xbox Always On With Aladdin Xt

  • Please log in to reply
4 replies to this topic

#1 parkhill456


    X-S Enthusiast

  • Members
  • 20 posts

Posted 09 December 2004 - 03:08 AM

how can i enable my xbox to boot with the chip always on its a 1.0

#2 shepd


    X-S Member

  • Members
  • Pip
  • 126 posts

Posted 10 December 2004 - 05:32 PM

QUOTE (parkhill456 @ Dec 9 2004, 04:11 AM)
how can i enable my xbox to boot with the chip always on its a 1.0

Remove all wires going to your aladdin advance.

Solder the D0 point on your XBOX to ground (the screws are grounded, for example).

You may need to connect the BT point on aladdin XTs to ground as well.

If you choose to make it switchable, but not through the button, you can add a switch to disconnect D0 from ground when you wish. The BT point on the aladdin XT can be left soldered permanently.

#3 michgene35


    X-S Enthusiast

  • Members
  • 4 posts

Posted 29 January 2005 - 05:56 AM

Do you mean Sodder the DO pt from the Aladdin?

#4 themikesssta


    X-S Member

  • Members
  • Pip
  • 105 posts

Posted 29 January 2005 - 06:28 AM

connect DO on the MB to ground on the MB

#5 Unseen Shadow

Unseen Shadow

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,043 posts

Posted 29 January 2005 - 09:00 AM

....in summary....ground the d0 point from the mobo...to a screw hole or w/e....but for the xt, you should also ground the bt point on the chip....so solder a wire from bt to a ground

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users