Jump to content


Photo

Uix Using Uxe 61 Or 71 Softmod


  • Please log in to reply
7 replies to this topic

#1 iammnm

iammnm

    X-S Enthusiast

  • Members
  • 23 posts

Posted 16 January 2005 - 10:06 PM

if you are already running the UXE exploit, go into the C drive, fonts folder, then the dashboard folder. In the dashboard folder, delete everything in there, yes, everything. replace those evox files with the uix.xbe and the folder "user.interface.x.dash" once that is done, go into the folder "user.interface.x.dash" and in the fonts folder, place the fonts from UIX and in the audio folder, the audio from the UIX distribution. Now that you have everything setup, change the name of the file "uix.xbe" to "default.xbe" the reason for changing the file name of the xbe is because the uxe softmod is looking for that filename and if you change it to anything else, it will not work, so the xbe has to be named default.xbe. i hope this tutorial helps out all those who had the same problem i had with getting it to work. This dashboard freaking owns! Good Luck

#2 beeny

beeny

    X-S Young Member

  • Members
  • Pip
  • 47 posts

Posted 18 January 2005 - 05:52 PM

iv'e done everything you said but i get a error 21.but if i launch the default.xbe in the dashboards folder with boxplrer it works. if i change it back to evox evox will load but not uix any idea's

TIA

Edited by beeny, 18 January 2005 - 05:53 PM.


#3 iammnm

iammnm

    X-S Enthusiast

  • Members
  • 23 posts

Posted 19 January 2005 - 05:28 AM

hmmmmmmmmmmmmm it's worked on all the boxes i've done so far, except for one, that that was one that was purchased yesterday. so i don't know if they've done something to new boxes or what. but also, i forgot to mention that i've gotten the updated uxe cause there is a version 1 and a version 2 i just got the newest one. double check, triple check that you've put everything where it should go and don't change anything else, it should work. good luck if that's not it, then let me know everything else aobut your mod and how you did it, and i'll see how else i can help smile.gif

#4 beeny

beeny

    X-S Young Member

  • Members
  • Pip
  • 47 posts

Posted 19 January 2005 - 03:47 PM

This is an old V1.0 xbox with a pcbioxx i hold the eject button down to load the normal m$ bios , i have everything in the right place(i think) the evox dash boots and the uix dash will boot if launched from boxplorer but not if i run the exploit error (21) my C drive looks like this

C:/Audio
C:/f0nts
C:/fonts
C:/fonts/bert and ernie
C:/fonts/nk/nkpatcher.xbe
C:/fonts/nk/apps......
C:/fonts/Dashboard/user.interface.x.dash
C;/fonts/Dashboard/default.xbe (tried both xbe's).
C:/xboxdash.xbe

uix has the audio and fonts in there folders

i also got

C:./user.interface.x.dash
C:/evoxdash.xbe (uix renamed)

for when i boot with power button (x2 4983.06)

which works fine

its probably something starring me in the face but i just cant see it

#5 iammnm

iammnm

    X-S Enthusiast

  • Members
  • 23 posts

Posted 23 January 2005 - 09:03 AM

it looks like you said you had two fonts folders in your C: i only have one, on the root of my C: i have only fonts and xboxdash.xbe that may be why.....??

#6 nsspeak

nsspeak

    X-S Senior Member

  • Members
  • PipPip
  • 193 posts
  • Location:getyourcarstolenonceayear, wa
  • Xbox Version:v1.6

Posted 01 February 2005 - 09:58 AM

I got it to work, although I didn't need this tutorial. I DID need to see this tutorial to make me even know WTF uix was though. EXACTLY what a softmodder needs. my friend is gonna thank me since he now has soundtrack access and memory access. getting msdash to work on a softmod is a bigger, fatter bitch than soldering a chip in.

beerchug.gif

#7 iammnm

iammnm

    X-S Enthusiast

  • Members
  • 23 posts

Posted 10 February 2005 - 02:11 PM

well, i'm glad i was of some help to you then smile.gif good luck to everyone else trying to get this thing to work.

#8 Altimit

Altimit

    X-S Young Member

  • Members
  • Pip
  • 37 posts

Posted 22 February 2005 - 01:31 AM

Didn't work for me. I can't get it to run as a secondary app either. Every other dashboard I've ever tried works fine but the one that looks like it actually has what I need refuses to start.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users