Jump to content


Photo

Resister Popped Off While Soldering


  • Please log in to reply
10 replies to this topic

#1 bigtrident

bigtrident

    X-S Enthusiast

  • Members
  • 12 posts

Posted 05 February 2005 - 04:46 AM

I was performing the extender mod and this mod requires you to solder on both sides of the resistor called R3G3. I have done some searching and it appears this may be a 10k resistor. I tried bridging the circuit to no avail. Also, when this circuit popped off it removed a part of the embeded wire on the board so i have nothing to solder to. I have a v1.1 board. Does anyone know where I can pick this wire up at another point? Also, is R3G3 a 10k resistor? Where can I buy one? Radio Shack? This is a link that show what I am talking about.
http://www.teamxtend...&artid=1&page=3

#2 networkBoy

networkBoy

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,916 posts
  • Xbox Version:v1.1
  • 360 version:none

Posted 05 February 2005 - 09:24 AM

Yup, that's a 10K resistor.
I do repairs if you're interested (link in sig).
you should be able to use a short length of 30 Ga wire to bridge the traces (look to the repairs section on my site for some examples).
-nB

#3 NobleDell

NobleDell

    X-S Enthusiast

  • Members
  • 3 posts

Posted 07 February 2005 - 04:10 PM

I was working on v1.3 box and I burnt off the R3G3 resistor. So I did some research and found a site that said that I should use a 1k ohm resistor. I put it in and it powered on fine. Is this a huge problem? Although I tried doing the same to a v1.0 that had the R3G3 burnt off and it didn't work.

#4 Chancer

Chancer

    Don't You Trust me?

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 18,687 posts
  • Gender:Male
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 07 February 2005 - 04:35 PM

network Boy has given the correct value. the resistor is 10K.

#5 GTi

GTi

    X-S Enthusiast

  • Members
  • 3 posts

Posted 07 February 2005 - 07:15 PM

I have the same problem with the R2G10 resistor. Could anybody tell me the correct value for the R2G10 resistor (v1.0) ?

#6 menelik

menelik

    X-S X-perience

  • Members
  • PipPip
  • 413 posts

Posted 07 February 2005 - 07:18 PM

47 ohm on a 1.4 mobo

#7 networkBoy

networkBoy

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,916 posts
  • Xbox Version:v1.1
  • 360 version:none

Posted 07 February 2005 - 08:00 PM

QUOTE(menelik @ Feb 7 2005, 06:24 PM)
47 ohm on a 1.4 mobo

View Post


If I may ask, how did you get that value?
-nB

#8 menelik

menelik

    X-S X-perience

  • Members
  • PipPip
  • 413 posts

Posted 07 February 2005 - 08:12 PM

i measured it and the smd resistor is labeled 470. moreover i got a 1.1 board and saw that r2g10 on 1.4 and 1.1 are different. cant look for the value as the resistor isnt on the 1.1 mobo. i guess 100 ohm.

#9 networkBoy

networkBoy

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,916 posts
  • Xbox Version:v1.1
  • 360 version:none

Posted 07 February 2005 - 08:24 PM

Good enough for me smile.gif
a lot of resistors can't be measured in circuit, but the 470 marking makes it pretty much a slam dunk. (I was wondering if it may have been a 49.9 ohm initally).
-nB

#10 Chancer

Chancer

    Don't You Trust me?

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 18,687 posts
  • Gender:Male
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 07 February 2005 - 09:08 PM

R2G10 is the L1 point on a V1.0 and its value is 100 ohms its marked 101

#11 GTi

GTi

    X-S Enthusiast

  • Members
  • 3 posts

Posted 08 February 2005 - 02:24 AM

Thanks for the answers guys...




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users