Jump to content


Photo

2.6ce Lite Problem


  • Please log in to reply
1 reply to this topic

#1 solo220

solo220

    X-S Enthusiast

  • Members
  • 24 posts

Posted 06 February 2005 - 04:53 PM

i just installed the 2.6ce lite chip on a 1.6 xbox, but it doesn't boot to the bios flash screen. with the chip off, the box works fine, with it turned on, the power flashes on and off a few times then the xbox turns red and nothing's on screen, can any help?

#2 thepurpledino

thepurpledino

    X-S X-perience

  • Members
  • PipPip
  • 325 posts
  • Xbox Version:v1.0

Posted 06 February 2005 - 05:45 PM

Wow.. turns off and on a few times then flashes red an green??

What could that be??

Sorry.. it's just the most common question asked here...

do some searches... it's called a Frag..

The 2.6 comes pre flashed with good versions of Flashbios.. So, I doubt it's a bios issue

If the xbox boots with the chip disabled, you have a good d0 connection

I'll bet you either screwed up the pin header or the LPC rebuild. Check it closely. Use a magnifying glass and a multimeter. You probably have a bad solder point somewhere.


QUOTE(solo220 @ Feb 6 2005, 03:59 PM)
i just installed the 2.6ce lite chip on a 1.6 xbox, but it doesn't boot to the bios flash screen. with the chip off, the box works fine, with it turned on, the power flashes on and off a few times then the xbox turns red and nothing's on screen, can any help?

View Post







0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users