Jump to content


Photo

Flshed Xecuter 2.6 Mod With Evloution X M8 Bios!


  • Please log in to reply
2 replies to this topic

#1 madfreelancer

madfreelancer

    X-S Enthusiast

  • Members
  • 1 posts

Posted 17 February 2005 - 02:10 PM

uhh.gif Please if anyone can answer my questions. I flashed my xecuter 2.6 mod chip with the Evolution X M8 Bios and after it shut down I can't get it to go back into anything. When the chip is enabled I get the box turning off and on 2 or 3 times and then it just sits on a blank screen and the box flashes red/green. If the mod is disabled it will boot into the xbox original dash but it will then say xbox need servicing. Any suggestions would help. I am hoping I can resolve this issue. Thanks


#2 BinaryMod

BinaryMod

    X-S X-perience

  • Members
  • PipPip
  • 403 posts

Posted 17 February 2005 - 02:42 PM

have you already tried putting slayers boot disc in? It should be able to boot from the disc before it even attempts to boot from the hard drive - if it works, you can simply reinstall evox or reflash your chip ect.

#3 Chancer

Chancer

    Don't You Trust me?

  • Head Moderators
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 18,687 posts
  • Gender:Male
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 17 February 2005 - 05:57 PM

The flash has messed up. You only flashed 1 bank right? so you should still have flash bios on the other. Switch to the bank with flash bios on and then reflash the bad bank.
You cannot at this point boot slayers unless you have a bank with a working hacked bios which you don't.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users