Reset Power Button On S Controller
3 replies to this topic
Posted 23 February 2005 - 05:54 PM
about the reset button on the controller. I install the momentary switch in the controller and I solder it to the ground and the power in the controller. Then in the xbox I take the yellow wire from one of the ports and I make it longer and solder it to the second point from the bottom on the power/eject assembly. Is this correct. Is there anything else to this mod at all. Do I need to do anything with the yellow wire I cut besides solder it to the power/eject assembly. What about the other half of the yellow wire I cut that is hanging out from the white plug on the end of the controller port. Where is a good placement for the swith an a controller-s.
Posted 23 February 2005 - 06:18 PM
QUOTE(tryintomod @ Feb 23 2005, 05:00 PM)
I install the momentary switch in the controller and I solder it to the ground and the power in the controller.
Probably gonna nuke your controller if you hook it up that way...
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users