Jump to content


Photo

Spice And S.p. Adapter


  • This topic is locked This topic is locked
7 replies to this topic

#1 fujitech

fujitech

    X-S Member

  • Members
  • Pip
  • 111 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 25 March 2005 - 02:32 PM

SPICE installation manual

Alternate 5v for Universal S.P adapter Install Guide

Make sure you have read these manuals before posting and asking for any help!

ALSO:

Make sure the pcb sits flat on the adapter and the alignment washer sits inside the groove.
seen pic 2

Have in mind that the hooks must be fitted inside the vias not on the edge
see pic 5 and 6

Make sure u have correct alignment of the adapter
see pic 7

Edited by appleguru, 12 May 2005 - 12:45 AM.


#2 zonetripper

zonetripper

    X-S Enthusiast

  • Members
  • 3 posts

Posted 12 April 2005 - 07:28 PM

Just installed an SP Ice on a 1.6 w/ the adapter. Very easy and straightforward. So, my question is: is there a manual for any other versions? like 1.5, 1.4?

or is it the same?


I only find the 1.6 manual for the SP Ice w/ adapter


Thanks in advance.

#3 SeaWolf69

SeaWolf69

    X-S Young Member

  • Members
  • Pip
  • 31 posts
  • Location:Alaska
  • Interests:Reading, diving, video games
  • Xbox Version:v1.0

Posted 13 April 2005 - 05:58 AM

Ok,

I'm pretty sure I have a version 1.6b & I installed the sp adaptor, all the red leds came on, double checked the hooks were in the right place by refering to the install manual. My package didn't come with the place template? I turn off & put the chip on, the led that is supposed to turn off goes off, the mod chips red led is lit up, but it turns on & off a couple of times & frags? I take the chip off & my xbox boots up normally? Any help would be greatly appreciated. Thanks...

Edited by SeaWolf69, 13 April 2005 - 06:04 AM.


#4 Rabid1

Rabid1

    X-S Expert

  • Members
  • PipPipPip
  • 546 posts

Posted 20 April 2005 - 05:16 AM

QUOTE(zonetripper @ Apr 12 2005, 06:34 PM)
Just installed an SP Ice on a 1.6 w/ the adapter. Very easy and straightforward. So, my question is: is there a manual for any other versions? like 1.5, 1.4?

or is it the same?


I only find the 1.6 manual for the SP Ice w/ adapter
Thanks in advance.

View Post



I did a small tut on TeamXodus in the Installation forum. But basically it is the same as for the standard solderless. You use the black bottom half of the S.P. and the Xenium chip. The LED half isn't used.

#5 ebaydealz4u

ebaydealz4u

    X-S Enthusiast

  • Members
  • 2 posts

Posted 01 May 2005 - 08:40 PM

QUOTE(Rabid1 @ Apr 20 2005, 04:22 AM)
I did a small tut on TeamXodus in the Installation forum. But basically it is the same as for the standard solderless. You use the black bottom half of the S.P. and the Xenium chip. The LED half isn't used.

View Post




so do you mean that the white peace with the 4 LED's that stick out your not suppost to use that on versions older than 1.6????

#6 appleguru

appleguru

    an Apple a Day...

  • Members
  • PipPipPipPipPipPip
  • 2,694 posts
  • Location:Colorado Springs, CO Boston, MA
  • Xbox Version:v1.6
  • 360 version:v1 (xenon)

Posted 01 May 2005 - 10:11 PM

QUOTE(ebaydealz4u @ May 1 2005, 01:46 PM)
so do you mean that the white peace with the 4 LED's  that stick out your not suppost to use that on versions older than 1.6????

View Post



That's exactly what he means smile.gif

#7 ebaydealz4u

ebaydealz4u

    X-S Enthusiast

  • Members
  • 2 posts

Posted 04 May 2005 - 02:00 AM

QUOTE(appleguru @ May 1 2005, 09:17 PM)
That's exactly what he means smile.gif

View Post




Ok thanks....a couple more questions....
1) Is Extream Mods a safe site to buy from???
2) Since the older version xbox's do not require the white LED peace, is there a cheaper package that doesn't come with it???

thanks for all your help, if you have any advice you wouldn't mind giveing me...please email me... www.ebaydealz4u@yahoo.com


#8 appleguru

appleguru

    an Apple a Day...

  • Members
  • PipPipPipPipPipPip
  • 2,694 posts
  • Location:Colorado Springs, CO Boston, MA
  • Xbox Version:v1.6
  • 360 version:v1 (xenon)

Posted 10 May 2005 - 09:25 PM

QUOTE(ebaydealz4u @ May 3 2005, 07:06 PM)
Ok thanks....a couple more questions....
1) Is Extream Mods a safe site to buy from??? 
2) Since the older version xbox's do not require the white LED peace, is there a cheaper package that doesn't come with it???

thanks for all your help, if you have any advice you wouldn't mind giveing me...please email me... www.ebaydealz4u@yahoo.com

View Post




1) check out the official reseller list for safe places to buy: http://www.teamxodus...=viewlink&cid=1

2) yes, you can buy the older "USA" solderless kit from resellers that still have stock.. Have a look around.

Also, locking this topic as support questions really don't belong here. wink.gif




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users