Jump to content


Photo

Ps1 Lcd Instead Of Xbox Lcd Screen


  • Please log in to reply
17 replies to this topic

#1 rabbitstroker

rabbitstroker

    X-S Senior Member

  • XS-BANNED
  • PipPip
  • 246 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 22 April 2005 - 03:23 PM

Hi guys,
After reading on apost from this site about a ps1 lcd being modded to the top of an xbox, sadly he looks to be banned so we'll never find out how that 1 went. While i was at work i thought of the idea ( probly been thought of but i cant find a tut) of using a ps1 lcd that i would glue to our vans dash.
Is there away to do some kind of mod so that i could get a 20 ps1 lcd working as an xbox lcd for games instead of a 100 xbox lcd screen that i think may actually be smaller than the ps1 lcd screen.
If this is possible we shall do this.
Regards

#2 rabbitstroker

rabbitstroker

    X-S Senior Member

  • XS-BANNED
  • PipPip
  • 246 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 23 April 2005 - 07:41 AM

Well i've been searching all night and not found even 1 reference to a ps1 lcd screen modded to be used on an xbox. Well search i will do some more of today.
But i have been finding things like this
http://www.bit-tech.net/article/136

Edited by rabbitstroker, 23 April 2005 - 07:45 AM.


#3 bobthenob

bobthenob

    X-S Senior Member

  • Members
  • PipPip
  • 266 posts
  • Location:in the Fridge
  • Xbox Version:unk

Posted 23 April 2005 - 08:21 AM

hi ive used a psone lcd for my xbox fridge
how do you want to conect the psone lcd? It has a composite in jackplug (4 conections)
or you can open it up and solder on to the board all you need is 4 wires audio left audio right ,video and ground for video and audio

user posted image

user posted image

then youl need a voltage dropper 12v to 7.5 i used


user posted image


#4 welshkid

welshkid

    X-S Young Member

  • Members
  • Pip
  • 45 posts

Posted 23 April 2005 - 09:54 AM

where are you getting a ps1 screen for 20?

#5 doomie22

doomie22

    X-S Senior Member

  • Members
  • PipPip
  • 215 posts
  • Location:Wigan/N-West/UK
  • Xbox Version:v1.4

Posted 23 April 2005 - 10:41 AM

ebay.

#6 ferrari_rulz_02

ferrari_rulz_02

    X-S Transcendental

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 6,395 posts
  • Location:Lara, Victoria, Australia
  • Interests:my girfriend, then the xbox<br />and yes, it is in that order
  • Xbox Version:v1.2
  • 360 version:v1 (xenon)

Posted 23 April 2005 - 12:13 PM

QUOTE(doomie22 @ Apr 23 2005, 07:47 PM)
ebay.

View Post



ahh dont u just love ebay?
i wish i could find a cheap one like that around here..

#7 seriouslysilly

seriouslysilly

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,687 posts
  • Location:East Coast baby!!!
  • Xbox Version:v1.4
  • 360 version:none

Posted 23 April 2005 - 12:41 PM

eBay rocks!
wherelse can we get such deals?

#8 blagmaster

blagmaster

    X-S Genius

  • XS-BANNED
  • PipPipPipPip
  • 850 posts
  • Interests:girls
  • Xbox Version:v1.1
  • 360 version:unknown

Posted 23 April 2005 - 01:16 PM

eBay rocks, you can buy ''luftgitars'' there smile.gif

#9 ferrari_rulz_02

ferrari_rulz_02

    X-S Transcendental

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 6,395 posts
  • Location:Lara, Victoria, Australia
  • Interests:my girfriend, then the xbox<br />and yes, it is in that order
  • Xbox Version:v1.2
  • 360 version:v1 (xenon)

Posted 23 April 2005 - 01:37 PM

QUOTE(blagmaster @ Apr 23 2005, 10:22 PM)
eBay rocks, you can buy ''luftgitars'' there smile.gif

View Post



by that you mean airguitars dont you?

weird

#10 rabbitstroker

rabbitstroker

    X-S Senior Member

  • XS-BANNED
  • PipPip
  • 246 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 23 April 2005 - 05:57 PM

I'm going to get the ps1 screen now for def, it's 20 second hand from Game.
[QUOTE]It has a composite in jackplug (4 conections)[QUOTE]
Would this be easier than soldering to the board.
Well my setup would be as follows.
We'd be using a Xbox in car adapter to power the Xbox and hopefully the lcd screen would be screwed or glued to our works van dash. Now i have a spare xbox vid cable, could this be modded . And i allso noticed Bobthenob mentioned i would need a voltage dropper, how would i use that if the cigerette lighter was allready being used by the Xbox incar power supply?
Regards
Thanks for the help i'm recieving dudes.

#11 ferrari_rulz_02

ferrari_rulz_02

    X-S Transcendental

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 6,395 posts
  • Location:Lara, Victoria, Australia
  • Interests:my girfriend, then the xbox<br />and yes, it is in that order
  • Xbox Version:v1.2
  • 360 version:v1 (xenon)

Posted 24 April 2005 - 05:49 AM

[quote=rabbitstroker,Apr 24 2005, 03:03 AM]
I'm going to get the ps1 screen now for def, it's 20 second hand from Game.
[QUOTE]It has a composite in jackplug (4 conections)[QUOTE]
Would this be easier than soldering to the board.
Well my setup would be as follows.
We'd be using a Xbox in car adapter to power the Xbox and hopefully the lcd screen would be screwed or glued to our works van dash. Now i have a spare xbox vid cable, could this be modded . And i allso noticed Bobthenob mentioned i would need a voltage dropper, how would i use that if the cigerette lighter was allready being used by the Xbox incar power supply?
Regards
Thanks for the help i'm recieving dudes.

View Post

[/quote]

well it would be esier to hard wire the xbox into the car. so instead of using the ciggie adapter, stick it under the dash and wire it to the ciggie lighter socket. get the power for the screen from the xbox psu

#12 rabbitstroker

rabbitstroker

    X-S Senior Member

  • XS-BANNED
  • PipPip
  • 246 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 24 April 2005 - 08:53 AM

Things are looking up.
As soon as the shops open i'm off to get that ps1screen before someone eles gets it.
But before the shops open does anybody know the following?

How to make the xbox have a composite out jackplug (4 conections) with a composite in jackplug on the end for the ps1 mobile display.

As for powering both the units, i'm getting the in car power supply for Xbox with dc out for the Xbox mobile display (which i wont have cos it'll be a ps1 screen) and a 3 port incar adapter for cigerette lighter which'll mean i'll hopefully be able to charge my mobile phone up at the same time.


#13 ferrari_rulz_02

ferrari_rulz_02

    X-S Transcendental

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 6,395 posts
  • Location:Lara, Victoria, Australia
  • Interests:my girfriend, then the xbox<br />and yes, it is in that order
  • Xbox Version:v1.2
  • 360 version:v1 (xenon)

Posted 24 April 2005 - 01:28 PM

well to get the right outputs, you need to do some jumpering. do some searching to find the diagram that tells you what you need to jumper to get the right outputs

#14 bobthenob

bobthenob

    X-S Senior Member

  • Members
  • PipPip
  • 266 posts
  • Location:in the Fridge
  • Xbox Version:unk

Posted 24 April 2005 - 05:37 PM

do you only want to display on the psone lcd .
if so the easist way is to use the standard lead from the xbox 3 phono plugs male yellow Video, red right audio whiteleft audio
on the psone lcd solder a cable with three compsite female conections
as in my pic the ground from the two audios and the video go to

well a pics easeir to follow


user posted image

ant probs let me know


#15 rabbitstroker

rabbitstroker

    X-S Senior Member

  • XS-BANNED
  • PipPip
  • 246 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 24 April 2005 - 06:26 PM

Thats a great easy to follow couple of diagrams, respect Bobthenob, thankyou very much indeedy.
The damn ps1 screen was no longer in the shop window, it'd been sold about 2 week ago,lol.

Now the hunt is on for a cheap ps1 lcd.
I did get some usefull things today though, like a

30 cigerette lighter adapter to normal Uk plug socket wich i'll be trying with a double adapter tomorrow on the way to work with Xbox and 14" portable tv.

11 4 port cigerette adapter

Maybe the portable tv will be too much of a power drain for a 12v lighter socket,soon find out though, and if it works then maybe a vga adapter and a tft screen might be a good idea. But for the moment i've spent enough so a second hand ps1 screen is what i want.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users