Jump to content



Xecuter 2.x Modchip + Flashx V1.2 + Evox

  • Please log in to reply
No replies to this topic

#1 ThaCrip


    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,463 posts
  • Xbox Version:v1.0
  • 360 version:unknown

Posted 24 April 2005 - 05:31 AM

well some people may have already known this but i recently got FlashX v1.2 to work when booting it as a application from evox dashboard... cause normally it would just freeze up the xbox at the loading screen but now i got it to load up fine... here's how u do it.

DISABLE IGR (in game reset) in evox settings.
DISABLE TSR in evox settings.

then click on "save and exit" then reboot the xbox.

FlashX v1.2 will now boot up wink.gif ... just let it sit there for a few seconds on the loading screen and it will now boot into FlashX v1.2 when your using evox as a dashboard.

p.s. for those of you who dont know what this application does... it basically allows u to "upgrade" your bios on a already working Xecuter 2.x modchip'ed xbox... this is BY FAR (if u ask me) the best way/simplest way to upgrade your bios on a Xecuter 2.x modchip... it allows direct controll over which bank u want to flash to etc... and has NEVER failed on me even once wink.gif ... u can also use any bios file names u want.

WARNING: if you dont know what your doing... this application can potentially screw up your modchip!!! ... and u will be forced to either buy a programmer or use the "hotswap" method in order to get your modchip working again.

Edited by ThaCrip, 24 April 2005 - 05:40 AM.

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users