Jump to content


Photo

Xecuter Pro Not Booting


  • Please log in to reply
4 replies to this topic

#1 czakhary

czakhary

    X-S Enthusiast

  • Members
  • 21 posts

Posted 23 March 2003 - 08:21 PM

I installed my pro and did the test to make sure the chip is in correct and I flashed the chip. Everything went perfect not problems no errors. I filled 3 banks with the .6 evox and the last one with the eject fix the flash verified. My problem comes when I boot up my xbox the light still blinks green and red no matter what i do to the swithces on the LCP. What possibly could be wrong or done incorrectlty?

#2 czakhary

czakhary

    X-S Enthusiast

  • Members
  • 21 posts

Posted 23 March 2003 - 08:48 PM

I forgot to say that I used pogo pins

#3 blackout_19

blackout_19

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,361 posts

Posted 23 March 2003 - 09:40 PM

The pogo pins are not seated correctly, or the switches are not set right.

#4 czakhary

czakhary

    X-S Enthusiast

  • Members
  • 21 posts

Posted 23 March 2003 - 09:53 PM

I filled 3 banks with the .6 evox and the last one with the eject fix the flash verified. With this bios setup which swiches should be off or on? or is this not a functonal setup?

#5 akula169

akula169

    X-S X-perience

  • Members
  • PipPip
  • 439 posts
  • Xbox Version:v1.1
  • 360 version:v3.0 (falcon)

Posted 28 March 2003 - 12:09 AM

Here's the guide for the switch settings: here

Pretty self-explanitory




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users