Jump to content



Strange Problems With X3ce

  • Please log in to reply
1 reply to this topic

#1 effowe


    X-S Enthusiast

  • Members
  • 22 posts

Posted 30 May 2005 - 01:10 AM

I recently installed an X3Ce into my 1.6 box, and have had isses with it since the install. The chip was working at one point, and the X3_3108 v16 bios was flashed to it without a problem. I had to get the LPC rebuild on my box re-done, and now I am having an issue with the Xbox booting when the mod is enabled. The Xbox will turn on for a second then just turn off, no more reboots, or Fragging. The weird thing is, I am able to boot into Flashbios and flash the chip, as I tried flashing the X3_3283 v16 bios to see if that would fix the problem (it didn't.) I am also able to disable the chip and the Xbox will boot, I get an error 7, but thats because the retail HD isn't in it now. The chip is also getting power, and both blue LED's are on.

I was wondering if anyone has seen this problem before, and if so, what the cause of it was?


#2 MonsterTy


    X-S Expert

  • Members
  • PipPipPip
  • 538 posts
  • Gender:Male
  • Location:Lafayette, Indiana
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 30 May 2005 - 03:07 PM

Check all of your solder points.... and if you want to get rid of the error 07, when you get it booting up again; lock your HDD.

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users