Xenium Sp Ice
Posted 17 June 2005 - 02:46 PM
I followed the installation instructions regarding version 1.6 for the solderless
xenuim spice. I get all red lights for first power on test, when I cap it with the
xenium face plate I get all lights except for the one which is noted in the install
instructions, Everthing is good! After double checking the install twice i still get
no video and a constant flashing yellow light around the dvd-rom eject button.
Xcalibur video chip
should be version 1.6
Posted 17 June 2005 - 03:04 PM
Posted 17 June 2005 - 05:17 PM
How can little gold wires damage the motherboard. I can take the mod off and it works. Tested out both xenium spices' that I ordered and both do the same thing.
Posted 17 June 2005 - 08:01 PM
you could also try flipping the recovery switch on the chip.
Posted 17 June 2005 - 08:02 PM
EDIT: It is more than possible to damage the mobo with a solderless adapter, in fact its as easy if not easier than with soldering. If you thing you are 100% safe with an adapter you are wrong, you have to be just as careful as you would with soldering.
Edited by acemilo, 17 June 2005 - 08:03 PM.
Posted 17 June 2005 - 09:05 PM
Any other ideas.
Wandering to myself now if this is normal, did not have controller / video cable pluged in only powered on after install?
Edited by milodog, 17 June 2005 - 09:17 PM.
Posted 17 June 2005 - 09:20 PM
If you have a magnifying glass, check your wires.. good luck
EDIT: I read that you took your adapter off.. now you need to start at square 1 getting everything aligned perfectly
Edited by tbg1111, 17 June 2005 - 09:24 PM.
Posted 17 June 2005 - 09:39 PM
Posted 17 June 2005 - 10:38 PM
Post back in a bit.
Posted 18 June 2005 - 12:11 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users