Crystal Clear Jewel
Posted 07 July 2005 - 09:37 PM
Posted 07 July 2005 - 09:40 PM
Posted 07 July 2005 - 09:44 PM
Also, Brasso gets out very small scratches.
Posted 07 July 2005 - 10:12 PM
Get some brasso - Put a blob of brasso onto a rag.
Flatten out the rag - and place the jewel ontop of the blob of brasso.
Now rub the jewel back and forth applying as much pressure as possible.
Do this for about a further 5 mins ( More pressure and the faster that you can move it will give a better effect ) - Note: Using this method causes a terrible chemical smell because you are actually heating up the plastic and in effect melting a very small ammount of it away - Use it it a well ventilated area - and use a painters mask or a wet tshirt so that you dont breathe it in.
wipe off excess brasso - and wait for the jewel to cool down - then run it under running water.
Check the jewel in the light and see if it is crystal clear - If not repeat the steps until it is.
Posted 08 July 2005 - 01:16 AM
Posted 08 July 2005 - 03:52 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users