Jump to content


Photo

Executer 2 Pro Solder Tips?!


  • Please log in to reply
4 replies to this topic

#1 dc2000

dc2000

    X-S Member

  • Members
  • Pip
  • 127 posts

Posted 04 April 2003 - 02:17 AM

Hey,

I have the executer 2 pro, and I cant get mine to work.. Soldering-wise.. I try everything... and they keep comming off.. aah

Any soldering people in Vancouver BC Canada? Plz contact me at chris_sosnowski@hotmail.com smile.gif.. any tips by the way? Aaah!

#2 Xeero

Xeero

    Welcome Back!

  • Members
  • PipPipPipPipPipPipPipPipPipPipPipPip
  • 8,413 posts
  • Location:Massachusetts
  • Xbox Version:v1.0

Posted 04 April 2003 - 02:22 AM

What are you having trouble soldering? Just the d0? Did you apply some flux?

#3 dc2000

dc2000

    X-S Member

  • Members
  • Pip
  • 127 posts

Posted 04 April 2003 - 02:34 AM

It's just that...

I solder it onto the board.. and a second it comes off by itself.. I dont want to put alot because it might touch another trace... AAAH sad.gif this sucks!

#4 BCfosheezy

BCfosheezy

    X-S Freak

  • XS-BANNED
  • PipPipPipPipPip
  • 1,668 posts
  • Location:Southern Illinois
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 04 April 2003 - 05:22 AM

secure the wire before soldering. This way once it is soldered it can't move anyway

#5 Xeero

Xeero

    Welcome Back!

  • Members
  • PipPipPipPipPipPipPipPipPipPipPipPip
  • 8,413 posts
  • Location:Massachusetts
  • Xbox Version:v1.0

Posted 04 April 2003 - 05:28 AM

Apply a small amount of flux to the board around the d0 point. Apply a tiny droplet of molten solder to the point and let it solidify. Press the wire against the hardened solder. Slowly move the iron toward the solder until it melts; given the light pressure you're applying with the wire, it should be pressed into the molten solder. Move the iron away while leaving the wire there. Wait several seconds and let go of the wire. Cakewalk.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users