Jump to content


Photo

Tsop Help


  • Please log in to reply
9 replies to this topic

#1 Serial_KillaZ

Serial_KillaZ

    X-S Enthusiast

  • Members
  • 20 posts

Posted 28 July 2005 - 04:00 AM

Alright heres my prob, i got a Ver 1.3 xbox.. Did the soldering, Did the 007 AUG trick.. with Raincoat.. and i telnet it.. and get this error.. "Try adding the device ID to /etc/raincoat.conf" I was wondering if this error means the solder is bad.. or if i have to add something to the conf file? if so Will anyone help me out?

#2 donuthole2010

donuthole2010

    X-S Member

  • Members
  • Pip
  • 96 posts
  • Xbox Version:v1.0
  • 360 version:v4.0 (jasper)

Posted 28 July 2005 - 04:06 AM

what type/brand of TSOP do you have and check your soldering anyway, just to be safe.

#3 Serial_KillaZ

Serial_KillaZ

    X-S Enthusiast

  • Members
  • 20 posts

Posted 28 July 2005 - 04:35 AM

"ST M29F0028T70N1 5BS1E 0321" THats everything on my TSOP Didnt know if you needed it all.. or not!

And i dont see that in the Raincoat.conf


solders are fine have checked and check and re-did them several times.. Should be fine!!

#4 donuthole2010

donuthole2010

    X-S Member

  • Members
  • Pip
  • 96 posts
  • Xbox Version:v1.0
  • 360 version:v4.0 (jasper)

Posted 28 July 2005 - 05:10 AM

ok when you are in this forum look at the stickies, go to the one that says "TSOP tutorials collection" and click the link that says "What Brand TSOP Do I Have?" and scroll down to the "ST" section and where it says code and lists a bunch of numbers, offsets, and words. copy and paste them into you raincoat.conf. and i believe if you have raincoat 0.7 it should have it in there, so before you do that make shure that you have v0.7. hope that helps.

#5 solder_blob

solder_blob

    X-S X-perience

  • Members
  • PipPip
  • 346 posts
  • Location:Land of the Damned...
  • Xbox Version:unk

Posted 28 July 2005 - 05:13 AM

QUOTE(Serial_KillaZ @ Jul 27 2005, 11:11 PM)
Alright heres my prob, i got a Ver 1.3 xbox.. Did the soldering, Did the 007 AUG trick.. with Raincoat.. and i telnet it.. and get this error.. "Try adding the device ID to /etc/raincoat.conf"  I was wondering if this error means the solder is bad.. or if i have to add something to the conf file? if so Will anyone help me out?

View Post




Why don't you try the AUF Gamesave where you simply load the gamesave and the video goes out for a min or so while it's flashing, instead of telnetin and doin all that... might work for you...

Cheers!
beerchug.gif


#6 Serial_KillaZ

Serial_KillaZ

    X-S Enthusiast

  • Members
  • 20 posts

Posted 28 July 2005 - 03:44 PM

Alright i can do that, Whats the 007 name i should get? And can i get it at Xbins?


And ill try it with raincoat v.07, i have v.05!!

Edited by Serial_KillaZ, 28 July 2005 - 03:48 PM.


#7 donuthole2010

donuthole2010

    X-S Member

  • Members
  • Pip
  • 96 posts
  • Xbox Version:v1.0
  • 360 version:v4.0 (jasper)

Posted 28 July 2005 - 04:15 PM

yeah if your using raincoat 0.5 than it wont work you need 0.7

#8 Serial_KillaZ

Serial_KillaZ

    X-S Enthusiast

  • Members
  • 20 posts

Posted 28 July 2005 - 04:25 PM

Im doing it right now as i type this is 0.7 Thanks for the help!!!

#9 donuthole2010

donuthole2010

    X-S Member

  • Members
  • Pip
  • 96 posts
  • Xbox Version:v1.0
  • 360 version:v4.0 (jasper)

Posted 28 July 2005 - 06:17 PM

thats what we are here for

#10 Serial_KillaZ

Serial_KillaZ

    X-S Enthusiast

  • Members
  • 20 posts

Posted 29 July 2005 - 02:50 AM

Went bad have to resolder!!




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users