Jump to content


Photo

Enigmah Chip And Upgrading Hd


  • Please log in to reply
2 replies to this topic

#1 brownsuga2k

brownsuga2k

    X-S Enthusiast

  • Members
  • 12 posts

Posted 31 August 2002 - 10:50 PM

Hi there,

I recently installed the Enigmah mod chip on my Xbox, and would like to upgrade the 8GB HD to something larger (say, 80GB). How exactly can a hard drive be upgraded with an ENIGMAH chip installed (can it even be done with this chip?)? Any help regarding this problem would grealty be appreciated, thanks!

#2 XanTium

XanTium

    Xanta Powa!

  • Admin
  • 3,110 posts
  • Location:Solaris
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 31 August 2002 - 11:54 PM

it cannot be done with an enigmah BIOS.

You need the HDD-swap trick.
Some bioses that have this :
evox2.x , x-ecuter , complex 1.xx

So if u want a modchip with those bioses you can :
-buy an x-ecuter ($49)
-buy an openxbox and flash with one of those bioses ($59)
-make an homebrew mod and flash with one of those bioses ($5-10)
-flash your build-in bios ($0)


#3 lambers

lambers

    X-S Enthusiast

  • Members
  • 17 posts

Posted 01 September 2002 - 06:48 AM

It can be done with an enigmah if you boot with the enigmah mod and then dissable the mod with a switch or by cutting the two wires, and then flashing the retail BIOS on your xbox with the EvoX BIOS. go to the tutorials section at xbox-scene and look for the HDD swap tutorial and also the adding switches tutorial. I have done this many times, never had a problem... instead of mounting the switches outside and wrecking my awesome paintjob on my xbox, I mounted them inside inder the DVD drive.... only need to switch them when doing major things.... anyway I am becoming long winded, good luck, it can be done, research the forums all the answers are there.

-Lambers
www.kewlkustomz.hopto.org




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users