Jump to content


Photo

Xbox 1.6 Turns On And Off


  • Please log in to reply
3 replies to this topic

#1 i_albarran

i_albarran

    X-S Enthusiast

  • Members
  • 21 posts

Posted 26 September 2005 - 03:38 PM

hi to everyone, i hope someone could help me with this one

i recently install a duox2 white on 1.6a mobo, it was working ok for about an hour then the xbox went off, then on for 1 min. then off again, when i push the power and eject button nothing happened, after i unpluged the power cable i heard a "fade out" scratch on the tv speaker, if i plug the power back the it turns on by it self for a litle while then the same issue repeats. I wait about an hour to try again and i was able to use the power and eject buttons again, but after 30 mins, the xbox repeat the symptom.

Please help me sad.gif

#2 v1perfan

v1perfan

    X-S Enthusiast

  • Members
  • 3 posts

Posted 27 September 2005 - 01:46 AM

Hi,

It sounds like the culprit may be a weak connection between your modchip and your motherboard. When the motherboard heats up, it expands which would result in poor/loss of connectivity bectween the soldered components. When it cools off, the contacts shrink an re-establish connection.

Check all of your soldered joints to ensure they are properly soldered. Also ensure there isn't any excess flux touching any other components.

#3 antz1970

antz1970

    X-S Genius

  • Members
  • PipPipPipPip
  • 786 posts
  • Location:united kingdom(scotland)
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 27 September 2005 - 01:53 AM

check your bt connection sounds like you may have caused some damage.


v1perfan - as far as i know m8 , flux aint conductive
so it wouldnt matter if there was flux touching other components , solder yes , but flux no beerchug.gif

Edited by antz1970, 27 September 2005 - 01:56 AM.


#4 i_albarran

i_albarran

    X-S Enthusiast

  • Members
  • 21 posts

Posted 27 September 2005 - 10:31 PM

done..

i doble checked the solder on the lpc everything is in order, and i checked other guides for this issue, im thinking that the xyclops is wrong, i know that xyclops has the pic integrated so i will replace it, i already order it, it will be on my place next week.

I hope i can get this mobo working, i will post further advances.

Thanks a lot guys




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users