Posted 03 March 2007 - 12:05 AM
Posted 15 April 2007 - 10:04 AM
Posted 15 April 2007 - 06:39 PM
Just patch the wireless controller into the stock wires, and get a spdt switch to switch the 5v wire between the two.
can u do it without a switch? and just hook up the wires for the wireless ones to the existing controller ports wires? and have them both work......[but witch ever one is on would work]....
or does this not work at all and would neither work....?
o yeah also, can someone explain teh difference between a rocker switch and a relay, and how one would install a rocker swithc? [u say put it between the 5v source but how do u do that?]
Edited by TR4G-, 15 April 2007 - 06:49 PM.
Posted 15 April 2007 - 07:05 PM
so you made a wireless into a wired? W00t1
he made it so you dont need that giant block of plastic sitting outside the case ready to trip over passers by
great tutorial, too bad im already wireless on my X360
Posted 28 June 2007 - 09:15 PM
it has 3 leads on the bottom, simply put the red wire from the motherboard to the center one, then use one of the side leads to go to the red on your wireless receiver, and the other side to the red going to the controller port. make sure all the other colors are going to both the receiver, and the port. (please note: when switch is in "wireless" position AND the wired controller is plugged in, neither controller will work. but you just simply switch to wired or unplug it and the other will work)
Posted 03 July 2007 - 05:06 AM
My thought on this is to grab another (I already have one) and wire up both wireless adapters internal to ports 3+4, and simply remove those ports completely, covering over the holes where they were.
Posted 25 September 2012 - 08:47 AM
Does anyone have the original images saved? can we get them posted?
Posted 26 September 2012 - 05:03 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users