Jump to content


Install With Outcome

  • Please log in to reply
2 replies to this topic

#1 sundrop


    X-S Young Member

  • Members
  • Pip
  • 53 posts

Posted 30 September 2005 - 05:13 AM

Got the board v1.0 from a friend. (dead board)

installed alladin, works fine with mod chip. (video, sound)

try to boot without modchip, 3 restarts and flashing green. (no video, or sound)

also i noticed, say i boot to modchip and then i turn off and try to restart normal mode, (knowing it aint working) well then i turn off and restart back in modchip. it makes me reset my settings.

nothing has been done to xbox except install, no installer no nothing.

hdd unlocks fine, i can see all the saved games and soundtracks etc.

So i ask what what is the next step in the situation?


#2 blind42


    X-S X-perience

  • Members
  • PipPip
  • 407 posts
  • Xbox Version:unk

Posted 30 September 2005 - 07:40 AM

Sounds like a damaged do trace ........ Samething happened with my first mod attempt on a 1.0 motherboard, i completly wrecked the bottom do beyond repair i tryed to fix it with a wire from one point to another that didnt work to good , so then i decided to solder the do to the top of the motherboard and it worked perfectly with the chip enabled so its sounding to me like you damaged that bottom do point...
with the modchip disabled i would get the red\green frag 3 times then it just shut off..

Edited by blind42, 30 September 2005 - 07:41 AM.

#3 sundrop


    X-S Young Member

  • Members
  • Pip
  • 53 posts

Posted 30 September 2005 - 07:53 AM

ahh there was no damage to this motherboard, i was the first to touch. basically, it was fragging before i installed the chip. Being that the board works with mod, im going after tsop flash. Any reccomendations?

IE easiest method smile.gif

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users