How To Connect The 2nd Aa To Battery Pack
Posted 22 November 2005 - 11:57 AM
The small metal part on the outside of the battery pack is pressed in when connected to the controller, connecting the two battery terminals and completing the circuit. Since our controller only had one terminal, no circuit was made.
1) Find your trusty roll of aluminum foil and tear off a small portion to fold into a rectangle.
2) Place it so it will touch the bottom of the battery and the bridge in the center.
3) Carefully place the battery into the pack so you don't displace the foil, and attach it to the controller.
4) Press the power button.. Hooray, your new 400 dollar Xbox360 is no longer worthless!
Posted 22 November 2005 - 01:41 PM
Posted 22 November 2005 - 02:01 PM
Posted 23 November 2005 - 08:25 AM
Posted 23 November 2005 - 02:50 PM
I have the same problem with BOTH my controllers, luckily I bought the play-charge kit, the only way I figured out how to fix the problem was keeping the batter back in the ctrlr, plugging in the play/charge kit for a 2nd and then unconnecting again, once the ctrlr got power it continued to work with the batteries!?
BOTH my controllers have the same issue, tested the batteries and they were fine, I'll try your fix and see if that's the issue with mine too!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users