Usb Flash Drive As Memory Unit
Posted 06 October 2008 - 07:53 PM
As I said before, what I am doing has nothing to do with this topic.
Posted 31 March 2009 - 11:07 PM
i just cracked open my box to reseat the heatsinks. yay rrod and i need a hard drive for this unit... i stumbled on this forum because i wanted to see if anyone had any luck getting a thumb drive to substitute as a hard drive or a memory unit so i can avoid buying a drive or a mem unit since i have about 50 thumb drives.
but i noticed that voltage may have been an issue as well and i would assume that the hard drive point is a higher voltage... and it would be a modified sata connection i would assume.
dunno.. good luck either way guys.
Posted 16 August 2009 - 05:38 PM
Posted 23 August 2009 - 04:44 PM
Or better yet, they also made this hard drive, which connects to the xbox 360 via usb port. If somebody could buy one and crack it instead of the card, we would be much closer to our goal. And besides, this hard drive only costs 29.99 unlike the memory card above, which is 49.99
your link was broken, but i assume you are talking about this?
if thats what you meant, that doesn't look like a solution. that looks like its just a 4 gig usb harddrive. in the features, it doesn't say anything about being able to save games to it, it only mentions using it to store music and such.
that drive will function the same as a 4 gig thumb drive.
Posted 04 January 2010 - 01:00 AM
I made the whole process with my 512mb MU.... but i just soldered a 20 ohm resistor in the Vusb and that was all... i plugged the MU in the pc and it recognized, i installed the drivers and tried to open with xport. It opened but i cant see the files, i can just see 2 partitions with nothing inside (except for some 2 nonsense files)....... and after soldering it didnt recognize in the 360, so i took off all the wires and solder and the xbox started recognizing again.
What did i do wrong?
and great forum
Posted 09 January 2010 - 01:45 AM
Posted 09 April 2010 - 03:09 AM
Posted 07 June 2012 - 07:25 AM
Posted 17 January 2013 - 01:49 AM
Im just curious. I need extra usb ports. Since these memory cards use a similar interface as usb, can I solder a usb pigtail onto the board and source 5v from else where? Will these mem ports recognize regular USB devices? Basically my question is, can these mem card ports be converted into usb ports.
I'd like to know this too
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users