Jump to content


Photo

Forcing A Mod Boot


  • Please log in to reply
1 reply to this topic

#1 madmodder

madmodder

    X-S Enthusiast

  • Members
  • 15 posts

Posted 17 April 2003 - 11:21 PM

My x2lite is installed but it still does a ms boot only.

Checked all solder/jumper/etc. All good.

To force a mod boot I used a piece of wire to connect my d0 wire to the ground, but this just gives me fraggin.

All I can think is my chip is bad. Thoughts anyone?



#2 CaliSurfer008

CaliSurfer008

    X-S Knowledgebase

  • Members
  • PipPipPipPipPipPipPipPip
  • 4,458 posts
  • Interests:Brahm is a whore
  • Xbox Version:v1.0

Posted 18 April 2003 - 12:16 AM

QUOTE (madmodder @ Apr 17 2003, 04:21 PM)
My x2lite is installed but it still does a ms boot only.

Checked all solder/jumper/etc. All good.

To force a mod boot I used a piece of wire to connect my d0 wire to the ground, but this just gives me fraggin.

All I can think is my chip is bad. Thoughts anyone?

If you are still just using the MS bios...then that means your chip isnt turned...try unsoldering all connections and resoldering them...also... i think it is your d0...use the d0 point on the backside cuz it is much easier...but resolder everything just in case




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users