Jump to content


Duo X2 (white) Lockup Problems

  • Please log in to reply
2 replies to this topic

#1 chapsrl1973


    X-S Enthusiast

  • Members
  • 11 posts

Posted 06 December 2005 - 11:15 PM

I have installed dozens of these in the past but the following situation has me stumped. So i am hoping that some of you can offer some suggestions on a fix.

Its a DUOX2 Cromwell installed in a Xbox 1.6
the rebuild is complete and double checked D0 and BT are connected.
When first installed bank 0 only gave a blank screen so i booted with bank 1 and then swithced back to bank 0, flashed the bios and the box boot fine with the evox bios. I have installed the dash and software using slayers installer and it will boot fine. the problem is when the chip is enabled it will cause a lock up after only 5 mins or so of game play. With the chip disabled there are no problems..

First i thought it might be the chip so i swaped in a brand new DUOX2, flashed it using the same mentioned above and i am getting the same results. Lock up when enabled fine when disabled.

Any suggestions on what i can do?


#2 hippo


    X-S Freak

  • PipPipPipPipPip
  • 1,195 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 06 December 2005 - 11:55 PM

Are you using the non plus M8 bios on a 1.6B? If so that would cause the lock ups.

#3 chapsrl1973


    X-S Enthusiast

  • Members
  • 11 posts

Posted 07 December 2005 - 12:29 AM

I was not aware there was a non plus m8 bios...

Is that something fairly new?

I'll have to take a look for it and give it a try. That might just be it!


I love this place!

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users