Jump to content


Photo

Japan Hd Av Cable To Vga


  • Please log in to reply
29 replies to this topic

#1 Adamq

Adamq

    X-S Enthusiast

  • Members
  • 19 posts

Posted 22 December 2005 - 10:58 AM

Hi i just got a JPN ver xbox 360 and it came with some wierd HD AV cable and i have no input for it on my plasma so i was looking for any info to see if i can cut the HD AV plug off (also known as a d terminal plug i think) and wiring up a rgb terminal (d-sub 15 pin connecter) so i can get some good resolution out of it. Any info would be a great help thanx smile.gif

#2 ze_olc

ze_olc

    X-S Senior Member

  • Members
  • PipPip
  • 229 posts
  • Xbox Version:v1.2
  • 360 version:unknown

Posted 22 December 2005 - 11:42 AM

i believe adpaters dont exist. there is some stuff gamecube though...
yes, there is probably a way to solder the wires and make a vga out of the d terminal cable. is d terminal just a different vga type? been loking for that info as well.

#3 Adamq

Adamq

    X-S Enthusiast

  • Members
  • 19 posts

Posted 22 December 2005 - 12:09 PM

QUOTE(ze_olc @ Dec 22 2005, 11:49 AM) View Post

i believe adpaters dont exist. there is some stuff gamecube though...
yes, there is probably a way to solder the wires and make a vga out of the d terminal cable. is d terminal just a different vga type? been loking for that info as well.

yes from what little info i have found the d term is just another type of vga connection my problem is what wire goes where.It has 3 thick wires pink blue and green and the other wires are thin black orange and pink there is also a black wire that loops back to a pin next to it uhh.gif

#4 Adamq

Adamq

    X-S Enthusiast

  • Members
  • 19 posts

Posted 22 December 2005 - 06:10 PM

It works i found a diagram at http://www.gamesx.co...nouts/jdcon.htm for a Japanese D connecter and wired it to a 15 pin monitor plug total cost to do this mod was $4.50 biggrin.gif

Edited by Adamq, 22 December 2005 - 06:15 PM.


#5 ze_olc

ze_olc

    X-S Senior Member

  • Members
  • PipPip
  • 229 posts
  • Xbox Version:v1.2
  • 360 version:unknown

Posted 23 December 2005 - 03:01 PM

confirmed working?
very interesting. indeed, there was something about gamecube...

#6 Adamq

Adamq

    X-S Enthusiast

  • Members
  • 19 posts

Posted 24 December 2005 - 12:30 PM

Yes 100% working and easy to do I got that link from a gamecube site it was one of the only diagrams i could find for a Japanese D Connector and the diagram for a 15 pin plug was in my instruction manual for my plasma.And i still have my av plugs for the old tv's tongue.gif if

#7 theboyfromthemoon

theboyfromthemoon

    X-S Enthusiast

  • Members
  • 11 posts

Posted 24 December 2005 - 02:26 PM

1 Y
2 Y GND
3 Pb
4 Pb GND
5 Pr
6 PR GND
7 Reserved
8 Line 1
9 Line 2
10 Reserved
11 Line 3
12 GND
13 Reserved
14 Plug In Flag

Can you tell me where to connect the wires from the D-terminal connector to the vga connector, something like this:

D-term:pin1Y------------VGA-pinx

Thanks



#8 Adamq

Adamq

    X-S Enthusiast

  • Members
  • 19 posts

Posted 24 December 2005 - 02:53 PM

Hi theboyfromthemoon

RGB terminal (D-Sub 15-pin connector)

pin-1 R(Pr/Cr)
pin-2 G or sync on green (y)
pin-3 B (Pb/Cb)
pin-4 No Connection
pin-5 No Connection
pin-6 R GND (Pr/Cr GND)
pin-7 G GND (Y GND)
pin-8 B GND (Pb/Cb GND)
pin-9 No Connection
pin-10 GND
pin-11 No Connection
pin-12 [SDA]
pin-13 H SYNC or H/V composite sync
pin-14 V sync [V.CLK]
pin-15 [SCL]

Hope this helps if you get stuck let me know and i will take a pic of the plug so you can see how it's wired up

Edited by Adamq, 24 December 2005 - 02:55 PM.


#9 ze_olc

ze_olc

    X-S Senior Member

  • Members
  • PipPip
  • 229 posts
  • Xbox Version:v1.2
  • 360 version:unknown

Posted 25 December 2005 - 09:13 AM

This is worth a tutorial...

#10 Adamq

Adamq

    X-S Enthusiast

  • Members
  • 19 posts

Posted 25 December 2005 - 11:04 AM

QUOTE(ze_olc @ Dec 25 2005, 09:20 AM) View Post

This is worth a tutorial...


Yes i think so i will take some pics of the plug tonight and post them


#11 theboyfromthemoon

theboyfromthemoon

    X-S Enthusiast

  • Members
  • 11 posts

Posted 25 December 2005 - 03:03 PM

My monitor its a sync on green compatible, so I think to solder only the Red, Blue, Green. Right ?

#12 Manya

Manya

    X-S Enthusiast

  • Members
  • 11 posts

Posted 28 December 2005 - 08:52 PM

QUOTE(Adamq @ Dec 25 2005, 12:00 AM) View Post

Hi theboyfromthemoon

RGB terminal (D-Sub 15-pin connector)

pin-1 R(Pr/Cr)
pin-2 G or sync on green (y)
pin-3 B (Pb/Cb)
pin-4 No Connection
pin-5 No Connection
pin-6 R GND (Pr/Cr GND)
pin-7 G GND (Y GND)
pin-8 B GND (Pb/Cb GND)
pin-9 No Connection
pin-10 GND
pin-11 No Connection
pin-12 [SDA]
pin-13 H SYNC or H/V composite sync
pin-14 V sync [V.CLK]
pin-15 [SCL]

Hope this helps if you get stuck let me know and i will take a pic of the plug so you can see how it's wired up



so, do I need to make extra wires from the xbox conector, or do I just use the 6 wires already there?

#13 skypainter

skypainter

    X-S Enthusiast

  • Members
  • 1 posts

Posted 29 December 2005 - 05:01 AM

QUOTE(Manya @ Dec 29 2005, 03:59 AM) View Post

so, do I need to make extra wires from the xbox conector, or do I just use the 6 wires already there?



Hi,

How should I connect the pin 8 ( Line 1 ) , pin 9 ( line 2) and pin 11 ( line 3 ) of the d-terminal to a VGA connector ? Are they suppose connect to pin 13, 14 and 15 for the VGA connector ?

#14 theboyfromthemoon

theboyfromthemoon

    X-S Enthusiast

  • Members
  • 11 posts

Posted 29 December 2005 - 11:18 PM

I believe Adam is out skying...no time to write a tutorial sleeping.gif ...

#15 Adamq

Adamq

    X-S Enthusiast

  • Members
  • 19 posts

Posted 30 December 2005 - 01:56 AM

QUOTE(Manya @ Dec 28 2005, 08:59 PM) View Post

so, do I need to make extra wires from the xbox conector, or do I just use the 6 wires already there?

Yes you need 4 bits of wire approx 35mm long they are the GND wires and i will post a step by step tut soon but im having too much fun with CoD 2 running in hd biggrin.gif




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users