Jump to content


Moron Strikes Again (getting Closer)

  • Please log in to reply
1 reply to this topic

#1 bustedsoldier


    X-S Enthusiast

  • Members
  • 12 posts

Posted 26 December 2005 - 06:55 AM


I got the NFO viewer. One problem sovled. Now, I have these directions:

1) Before burning, use the AID 2.1 ISO Updater Tool to include any Addon Packs
that you may desire (Lanuage packs, dummyfile etc.). This will create a brand
new ISO to burn, so that the original ISO is left untouched.

-ISO updater Tool. Does this mean I need AID v2.1 first? How do I get an iso file from the torrent file I have now?

2) Burn the ISO to an appropriate media, depending on your Xbox DVD-ROM Drive.
Note: DVD Decrypter is recommended for burning the ISO on to a DVD.
Note 2: CD-R/RW users need to run the DummyCD program before burning.

I'm not exactly sure what this means. I have an x-chip. Do I have to make a dummy CD or can I do this through FTP method? Whatever works. I'll do it.

3) Insert CD/DVD into the Xbox, then boot it with your modchip or softmod.

I'm not even close to this step yet

#2 tihspeed


    X-S Senior Member

  • Members
  • PipPip
  • 247 posts
  • Location:37* 49'35.59"N 122*25'21.96"W
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 26 December 2005 - 11:09 PM

First please make all comments under the same topic. Please stop making multiple threads for the same problems. Their is only one question mark in this whole topic so should I only assume you have one question?

The xchip does not have a installed ftp program. You have to use either a disk to install your programs from or you use a disk with a auto installer with a ftp program on it.

Open up your bit torrent program drag the small 5k file you got from the "usual places" into the bit torrent program and it will give you a much larger program that you will then open give the approprate password for then it will create a ISO file that you will burn to disk.

Please PM if you have any further questions

Edited by tihspeed, 26 December 2005 - 11:27 PM.

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users