Jump to content


Photo

Disabline X-lite Chip


  • Please log in to reply
8 replies to this topic

#1 rasstar

rasstar

    X-S X-perience

  • Members
  • PipPip
  • 400 posts
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 28 December 2005 - 04:58 AM

I have the M8 OS on the X-lite chip but when I load the MS bios the light on the modchip stays on. Is that normal ??

Edited by rasstar, 28 December 2005 - 04:58 AM.


#2 tihspeed

tihspeed

    X-S Senior Member

  • Members
  • PipPip
  • 247 posts
  • Location:37* 49'35.59"N 122*25'21.96"W
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 29 December 2005 - 07:45 AM

please explain how you are loading the ms bios. this may help. the light should shut off

If your xbox is a version 1.0 there is a PDF file somewhere i've seen in the past that says you cannot use the eject button to disable your chip you must boot your box holding a button to disable your chip. If you are aptempting to go onto xbox live with your 1.0 chip you will get banned. This also was for a x-chip... dunno bout the x-lite i never read those directions.

Edited by tihspeed, 29 December 2005 - 07:51 AM.


#3 rasstar

rasstar

    X-S X-perience

  • Members
  • PipPip
  • 400 posts
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 29 December 2005 - 02:55 PM

I boot the MS bios by holding down the X button. The Ms bios loads and I am able to get on Live but I have been banned. The xbox is a 1.4 so I don't understand. The light remains on all the time.

#4 tihspeed

tihspeed

    X-S Senior Member

  • Members
  • PipPip
  • 247 posts
  • Location:37* 49'35.59"N 122*25'21.96"W
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 30 December 2005 - 01:21 AM

what happens if you boot using the eject button? just trying to close all roads

#5 rasstar

rasstar

    X-S X-perience

  • Members
  • PipPip
  • 400 posts
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 30 December 2005 - 04:07 AM

The light still stays on. Even when I boot use the PCB to turn off the chip the light on the chip stays on and two lights on the pcb comes on also.

#6 tihspeed

tihspeed

    X-S Senior Member

  • Members
  • PipPip
  • 247 posts
  • Location:37* 49'35.59"N 122*25'21.96"W
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 30 December 2005 - 06:14 AM

weird. what other bios can you use on your chip. Maybe its the bios conflicting with chip. you've exhausted all posibilites. the only thing left is bios. maybe try a reflash or re download. it couldn't hurt anything. other than that I would have to say it would be the chip, but I hate to say that. Its almost always operator error. Any x-lites wanna chime in here... man this board is dead since the 360 came out.

#7 RicZilla

RicZilla

    X-S Young Member

  • Members
  • Pip
  • 39 posts

Posted 03 January 2006 - 07:27 PM

I think the light on the chip PCB is always on even if it's disabled it just show that you have +5 volts going to it. Do you have the DIP switch header installed ? Look at the disable led I think it's yellow when it's disabled you can also try the dip switch that disables the modchip see if that works. I never play on live so havent tried disabling it much only for troubleshooting.

#8 rasstar

rasstar

    X-S X-perience

  • Members
  • PipPip
  • 400 posts
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 04 January 2006 - 01:42 AM

I did everything. I guess the light remains on no matter what. On the PCB a greenish light comes on when i disable it with the PCB.

#9 RicZilla

RicZilla

    X-S Young Member

  • Members
  • Pip
  • 39 posts

Posted 04 January 2006 - 04:42 AM

From the xlite_settings.pdf

Detachable PCB:

Red means there is power going to the chip.

Green means the chip is in recovery mode (Cromwell flash menu)

Amber/Yellow means the chip has been disabled.

SW#4 has to be ON to see those leds.

SW#1 has to be ON to disable the X-Lite

Hope this clears up things.

I'm at home now and just tried it and that's what it does.

Except mine is stuck in recovery mode wink.gif





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users