Jump to content


Smartxx V3 Install Problem On Ver 1.0 Board

  • Please log in to reply
1 reply to this topic

#1 caprince


    X-S Enthusiast

  • Members
  • 10 posts

Posted 23 January 2006 - 03:56 AM

I have installed many SmartXX Ver 2 mod chips in the past. I am now trying to install a SmartXX Ver 3 on a 1.0 Xbox. I can't find any instructions. So I broke off the little D0 tab, installed a pin header and connected the D0 line per the Ver 2 instructions. It won't work. It just frags. As soon as I disconnect the D0 line the Xbox works as normal. I have double and triple checked my soldering. I have soldierd the D0 line directly to SmartXX, by passing the connector. I have used the connector and soldiered the black ground connection to the board and connecte the blue D0 wire uhh.gif . Nothing seems to matter. I am not a newbee. I have been doing this for 3 or 4 years. I must be missing something in the installition procedure, that I do not have.

#2 badboykiller35


    X-S Enthusiast

  • Members
  • 5 posts
  • Xbox Version:unk
  • 360 version:unknown

Posted 16 October 2006 - 03:07 AM

I bought a Smartxxv3 chip and install it by followin the steps
when i turn on my xbox it makes some wierd noises and then it turns offf , the light is blinking red

Pleaze i really need helpppppppppppppppppppppppppp

What am I doin wrong????

Dhiz iz ma First Time Installin da modchip

1. First i opened da xbox like it sayz in da guide

2. then took out da dvd rom hard drive etcc

3. then check ma Chip it iz "C O N E X A N T:

4.Remove da screwz from mother board N took da motherboard

5. Remove the pin shown in da picture from da distributed

6. Solder the holez for pinheader

7. Place da pinheader in holez on da xbox

8. IsolatedWires:
White, yellow, green, black

9. Solder the DO Cable(purple) az sayz in pic

10. connect the powercable leadin to da dvd-rom

11. connect da adapter cable to da plug on SmartXX v3

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users