Jump to content



Spider Gx W/ Versions 1.0 And 1.6a

  • Please log in to reply
1 reply to this topic

#1 gxnoob


    X-S Enthusiast

  • Members
  • 16 posts

Posted 10 February 2006 - 09:29 PM

Ok, here is the deal. I own a v1.6a, and a v1.0. I own the spidergx chip, and after many months of trouble trying to install it into the v1.6a, I figured I would go ahead and try it in the v1.0 becuase of the ovious problems with the functionality with the v1.6a.

SO im in the 1.0 box and my first problem was that the holes that the PCB fits into were filled with solder.
So after hours of messing with that, I got them clear enough for the chips prongs to at least touch a small portion of the inner hole. The PCB wire went in nicely, and now every time I power up I either get a frag, or the regular M$ dash. I have only gotten the chip to flash on once, and I wasnt watching the screen to see if it went to the spider menu. But now nothing I do will make the chip even act like its gonna turn on.

Has anyone gotten the chip to work vith versions V1.0 or V1.6A well?

Thanks for the help.

-GX(not so noob anymore)

#2 biobeck


    X-S Enthusiast

  • Members
  • 6 posts
  • Xbox Version:v1.0
  • 360 version:none

Posted 29 April 2006 - 10:49 AM

I've gotten the SpiderGX to work on both a 1.6a and a 1.0. However, it was an overall pain in the butt to get running and flashed. Try adding some pressure to the chip with a popsicle stick, that is usually the problem. If the chip appears dead try this tip from HackDaBox


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users