Jump to content


Photo

Please Help. Stupid Frag


  • Please log in to reply
2 replies to this topic

#1 bkblood

bkblood

    X-S Enthusiast

  • Members
  • 7 posts

Posted 15 February 2006 - 09:29 AM

i soldered in my spiderchip 1.1 with the pinheader describe here http://www.hackdabox...hip_solder.html. my xbox frags but only when my chip is connected to the d0 point. i also used the alternate d0 point on the back side as well as on the front. i got it working without soldering only 5 times. the 1st time i flashed with evox m8 plus. found out those dont do good on xbox 1.0's.
the other times i got it working was after the bios flash. it would boot up with the evox logo in the corner but to no dash. i could boot originals but not to evox or backups. i used my spider programmer and after about 8 hours i had flashed the x2 4794 bios. still to no availl it frags. wtf is the problem

Thanks for any help

#2 bkblood

bkblood

    X-S Enthusiast

  • Members
  • 7 posts

Posted 15 February 2006 - 12:18 PM

sorry wont let me delete this repost

#3 bkblood

bkblood

    X-S Enthusiast

  • Members
  • 7 posts

Posted 21 February 2006 - 04:41 AM

no help at all sad.gif




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users